PDP-434CMX
152
1
2
3
4
1
2
3
4
C
D
F
A
B
E
INSTALLATION OF THE UNIT
I
nstallation using the supplied display stand
Be sure to fix the supplied stand to the installation surface.
Use commercially available M8 bolts that are 25 mm longer
than the thickness of the installation surface.
1. Fix the supplied stand to the installation surface at
each of the 4 prepared holes using commercially
available M8 bolts .
2. Set this unit in the stand.
3. Fix this unit using the supplied washer and bolt.
CAUTION
This display unit weighs at least 32.5kg (71 lbs 10oz)
and has little front-to-back depth, making it very
unstable when stood on edge. As a result, two or
more persons should cooperate when unpacking,
moving, or installing the display.
110 mm (4-
5
/
16
in.)
Use a 6 mm (
1
/
4
in.) hex
wrench to bolt them.
Rear
Front
880 mm (34-
3
/
4
in.)
(Bolt hole thread pitch)