PDP-434CMX
149
5
6
7
8
5
6
7
8
C
D
F
A
B
E
DIGITAL RGB
DVI-D
COMBINA TION
IN OUT
RS-232C
ANALOG RGB IN
D-Sub
ANALOG RGB OUT
D-Sub
AUDIO
AUDIO
AUDIO
R
SPEAKER
8
~16
+ ñ
INPUT1
INPUT2
OUTPUT
1
SPEAKER (R) terminal
For connection of an external right speaker.
Connect a speaker that has an impedance of 8 -16
Ω
.
2
COMBINATION IN/OUT
Never connect any component to these connectors
without first consulting your Pioneer installation
technician.
These connectors are used in the factory setup.
3
RS-232C
Never connect any component to this connector without
first consulting your Pioneer installation technician.
This connector is used in the factory setup.
4
ANALOG RGB IN (INPUT1) (mini D-sub 15 pin)
For connection of a personal computer (PC) or similar
component. Make sure that the connection made
corresponds to the format of the signal output from the
connected component.
Note: Component signals are supported only when a video
card is installed.
5
ANALOG RGB OUT (INPUT1) (mini D-sub 15 pin)
Use the ANALOG RGB OUT (INPUT1) terminal to output
the video signal to an external monitor or other
component.
Note: The video signal will not be output from the
ANALOG RGB OUT (INPUT1) terminal when the main
power of this unit is off or in standby mode.
6
AUDIO (INPUT1) (Stereo mini jack)
Use to obtain sound when INPUT1 is selected.
Connect the audio output jack of components connected
to INPUT1 to this unit.
7
DIGITAL RGB (INPUT2) (DVI-D jack)
Use to connect a computer.
Note: This unit does not support the display of
copyguard-protected video signals.
8
AUDIO (INPUT2) (Stereo mini jack)
Use to obtain sound when INPUT2 is selected.
Connect the audio output jack of components connected
to INPUT2 to this unit.
9
AUDIO (OUTPUT) (Stereo mini jack)
Use to output the audio of the selected source
component connected to this unit to an AV amplifier or
similar component.
0
MAIN POWER switch
Use to switch the main power of the unit on and off.
-
AC IN
Use to connect a power cord to an AC outlet.
=
SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 -16
Ω
.
CONNECTION PANEL (PLASMA DISPLAY SECTION)
1
~
2
3
4
5
6
7
8 9
Plasma Display Section
The plasma display is provided with 2 video input connectors, 1 video output connector, audio input/output jacks and
speaker terminals.
When this option video card is installed on a plasma display, an additional three sets of video input connectors are
provided (total five), together with one additional video output connector (total two). (Refer to the following page.)
L
POWER
OFF
ON
AC IN
SPEAKER
8
~16
+
=
-
0