Pioneer PDA-5003 Technical Manual Download Page 79

Page: 79 / 213

Ceiling Mount Unit: PDK-5012

4.8.4 Attach the Plasma Display

Attach the PDP bracket to the Plasma Display.

Notes

• Place a sheet or protective cover to protect the dis-

play from scratches or damage.

• Be sure to work on top of a flat table or similar sur-

face.

• Be careful that the PDP bracket is not upside down.

Attach the Plasma Display to the hanger.

Screw the Plasma Display to the hanger (at 4 locations).

PDP bracket

Top side of Plasma Display

Hanger

Plasma Display

Top side of Plasma Display

Fix the Plasma Display to the PDP bracket with screws

(6 locations).

Note

Be sure to use the holes shown on [43] to attach the
PDP-425CMX/PDP-42MXE10.

Hexagonal bolts

Summary of Contents for PDA-5003






















































































































































































































Search results

Summary of Contents for PDA-5003

Reviews:

Related manuals for PDA-5003

Brands by name

Popular brands

Pioneer PDA-5003, Technical Manual

Search results

Summary of Contents for PDA-5003

Reviews:

Related manuals for PDA-5003

Brands by name

Popular brands