93
Customising preferences of the navigation
• Itinerary
:
Displays the list of manoeuvres (the
itinerary).
• Vehicle Profile
:
Displays the parameters of the selected
vehicle profile.
• Save Route
:
With this function you can save the active
route for later use.
• Load Route
:
With this function you can replace the
active route with a previously saved route.
• History
:
Displays the destinations history list. You
can select one of your previous
destinations.
• Route Settings
:
Displays the route related settings.
• Find Places
:
With this function you can search for Points
of Interest in various different ways.
• Simulate Navigation
:
Displays the map screen and starts
simulating the active route.
• GPS Info
:
Displays the GPS information screen with
satellite position and signal strength
information.
Setting the traffic information
The recommended route is not always the
same between two points. Whenever suitable
data exists, traffic information can be taken
into account in the route calculation.
1. Display the settings screen.
➲
For details of the operations, refer to
“Displaying the screen for navigation
settings” on page 91.
2. Touch [Traffic].
3. Touch the setting item.
• Historical Traffic
:
You can switch to enable or disable
historical traffic data and traffic patterns by
touching this key. This locally stored
information can be very useful in normal
circumstances but for example on public
holidays it may be better to turn off in order
not to take into account normal weekday
traffic jams.
• Traffic Receiver
:
You can set to enable or disable the TMC
receiver that can receive real-time traffic
information. The following items (Detour,
and Event types) are all related to the TMC
function and are available only if the
receiver is enabled.
• Detour
:
This setting determines how this system
uses the received real-time traffic
information in route calculation. When
calculating a new route, or when
recalculation becomes necessary based on
the received traffic events, this system
avoids traffic events if it makes sense.
You can also set the minimum delay that
triggers route recalculation, and you can
instruct the application if you want to
confirm every recalculation.
• Event Types
:
Touch this key to open the list of traffic
event types, and select which events to
take into account in route calculation.
Setting the user profiles
If more drivers use this navigation system,
their settings can be remembered by using
one of the user profiles.
1. Display the settings screen.
➲
For details of the operations, refer to
“Displaying the screen for navigation
settings” on page 91.
2. Touch [User Profiles].
3. Touch the key on the right of new profile
that you want to set.
❒
Rename the profiles so that all users know
which profile to use and switch between
profiles by touching its name.
❒
If you select a new profile, this system
restarts so that the new settings can take
effect.
13-MAN-AVICF550-EN.fm Page 93 Monday, April 8, 2013 3:02 PM
