Pioneer MVH-X370BT, Owner'S Manual

Page: 7 / 72

7
En
En
g
lis
h
The tuner frequencies on this unit are allocated for use in North America. Use in other
areas may result in poor reception.
1
Press SRC / OFF to select [RADIO].
2
Press BAND / to select the band from [FM1], [FM2], [FM3] or [AM].
3
Press a number button ( 1 / to 6 / ).
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 13).
The six strongest stations are stored on the number buttons ( 1 / to 6 / ).
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press / to select a station.
Press and hold / then release to seek an available station. Scanning stops
when the unit receives a station. To cancel seek tuning, press / .
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 13).
To store stations manually
1
While receiving the station you want to store, press and hold one of the number
buttons (
1 / to 6 / ) until it stops flashing.
Disconnect headphones from the device before connecting it to the unit.
USB device/iPod
1
Open the USB port cover.
2
Plug in the USB device/iPod using an appropriate cable.
CAUTION
Use an optional Pioneer USB cable (CD-U50E) to connect the USB storage device as any device
connected directly to the unit will protrude out from the unit, which could be dangerous.
Before removing the device, stop playback.
MTP connection
A device installed with Android OS 4.0 or later can be connected to the unit via MTP, using the cable
supplied with the device. However, depending on the connected device and the numbers of the files in
the device, audio files/songs may not be able to be played back via MTP. Note that MTP connection is
not compatible with WAV file formats, and cannot be used with the MIXTRAX function.
AUX
1
Insert the stereo mini plug into the AUX input jack.
2
Press SRC / OFF to select [AUX] as the source.
Radio
Receiving preset stations
Best stations memory (BSM)
USB/iPod/AUX
Playing back
AUX input jack (3.5 mm stereo jack)
USB port
SRC (source)/OFF
M.C. (multi-control) dial