- 34 -
En
g
lis
h
ILLUMINATION settings
Menu Item
Description
COLOR
[KEY COLOR], [DISP COLOR],
[BOTH COLOR]
Select color for the keys/display of the unit from 12
preset colors, [SCAN] or [CUSTOM]*.
•
[SCAN]: Cycle through a variety of colors
automatically.
•
[CUSTOM]*:
1
Press and hold the
M.C.
dial until the color
setting display appears.
2
Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 10 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C.
dial until the color setting display appears.
* The CUSTOM setting is only available for [KEY
COLOR] and [DISP COLOR].
DIM SETTING
[SYNC ILLUMI], [SYNC CLOCK],
[MANUAL]
Select the way to change the display brightness.
BRIGHTNESS
[KEY], [DISP]
Select the brightness for the keys/display of the
unit from [1] to [10].
The available setting ranges differ depending on
[DIM SETTING].
PHONE COLOR
Select the key color when a call is received.
[FLASHING]
Applies the color set by [KEY COLOR].
•
The illumination effect differs depending on
the selection of [ON] or [OFF] in [ILLUMI FX].
[FLASH FX1] to [FLASH FX6]
Cycle through a variety of colors automatically.
[OFF]
No change in key color made.
