INITIAL settings
7
C:\Program Files (x86)\Adobe\AdobeFrameMaker12\Structure\xml\Pioneer\1.0\020Chapter.fm
MVH-X300BT/MVH-X700BT/MVH-S315BT
19_812_813ME_QRI3105(B6_Horizon)
En
English
1
Press and hold
SRC
/
OFF
until the unit turns off.
2
Press the
M.C.
dial to display the main menu.
3
Turn the
M.C.
dial to select [INITIAL], then press to confirm.
4
Turn the
M.C.
dial to select an option, then press to confirm.
Menu Item
Description
FM STEP
Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
AM STEP
Select the AM tuning step from 10 kHz or 9 kHz.
[10], [9]
SP-P/O MODE
Select when there is a full-range speaker connected to
the rear speaker output leads and there is a subwoofer
connected to the RCA output.
[REAR/SUB.W]
[SUB.W/SUB.W]
Select when there is a passive subwoofer connected
directly to the rear speaker output leads and there is a
subwoofer connected to the RCA output.
[REAR/REAR]
Select when there are full-range speakers connected to
the rear speaker output leads and RCA output. If there is
a full-range speaker connected to the rear speaker
output leads, and the RCA output is not used, you may
select either [REAR/SUB.W] or [REAR/REAR].
SYSTEM UPDATE
Select [SYSTEM INFO] to confirm the latest system
information on the unit.
Select [S/W UPDATE] to update the unit to the latest
software and initialize the unit settings. For details on the
latest software and updating, visit our website.
[SYSTEM INFO],
[S/W UPDATE]
SYSTEM RESET
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
[YES], [NO]
Radio
Receiving preset stations
1
Press
SRC
/
OFF
to select [RADIO].
2
Press
BAND
/
to select the band from [FM1], [FM2], [FM3] or [AM].
3
Press a number button (
1
/
to
6
/
).
NOTE
You can select a preset channel by pressing
and turning the
M.C.
dial.
TIP
The
/
buttons can be also used to select a preset station when [SEEK] is set to
[PCH] in the FUNCTION settings (page
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (
1
/
to
6
/
).
1
After selecting the band, press the
M.C.
dial to display the main menu.
2
Turn the
M.C.
dial to select [FUNCTION], then press to confirm.
3
Turn the
M.C.
dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press
/
to select a station.
Press and hold
/
then release to seek an available station.
Scanning stops when the unit receives a station. To cancel seek tuning,
press
/
.
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page
PioneerTest.book Page 7 Friday, March 16, 2018 4:39 PM
