Pioneer MVH-AV285BT, Owner'S Manual

Page: 24 / 112

24
Precautions
Your new product and this manual
 Do not operate this product, any applications, or the rear
view camera option (if purchased) if doing so will divert your
attention in any way from the safe operation of your vehicle.
Always observe safe driving rules and follow all existing
traffic regulations. If you experience difficulty in operating
this product or reading the display, park your vehicle in a
safe location and apply the handbrake before making the
necessary adjustments.
 Do not install this product where it may (i) obstruct the driv-
er’s vision, (ii) impair the performance of any of the vehicle’s
operating systems of safety features, including airbags, haz-
ard lamp buttons, or (iii) impair the driver’s ability to safely
operate the vehicle. In some cases, it may not be possible to
install this product because of the vehicle type or the shape
of the vehicle interior.
 The graphical symbol placed on the product means
direct current.
Important safeguards
WARNING
Pioneer does not recommend that you install this
product yourself. This product is designed for
professional installation only. We recommend that only
authorised Pioneer service personnel, who have special
training and experience in mobile electronics, set up and
install this product. NEVER SERVICE THIS PRODUCT
YOURSELF. Installing or servicing this product and its
connecting cables may expose you to the risk of electric
shock or other hazards, and can cause damage to this
product that is not covered by warranty.
Precautions before connecting
the system
WARNING
Do not take any steps to tamper with or disable the
handbrake interlock system which is in place for your
protection. Tampering with or disabling the handbrake
interlock system could result in serious injury or death.
Connection
2 Touch the desired mode.

Full :
A 4:3 picture is enlarged in the horizontal direction only,
enabling you to enjoy an image without any omissions.
 Zoom :
A 4:3 picture is enlarged in the same proportion both verti-
cally and horizontally.

Normal :
A 4:3 picture is displayed normally, without changing its
proportion.
p
You cannot operate this function while driving.
p
Different settings can be stored for each video source.
p
When a video is viewed in a wide screen mode that does not
match its original aspect ratio, it may appear different.
p
The video image will appear coarser when viewed in “ Zoom ”
mode.
Setting the video signal for the
rear view camera
When you connect a rear view camera to this product, select the
suitable video signal setting.
p
You can operate this function only for the video signal input
into the AV input.
1 Display the “ Video Setup ” screen.
2 Touch [ Video Signal Setting ].
3 Touch [ Camera ].
The pop-up menu appears.
4 Touch the item you want to set.

Auto (default): Adjusts the video signal setting
automatically.

PAL : Sets the video signal to PAL.

NTSC
: Sets the video signal to NTSC.

PAL-M : Sets the video signal to PAL-M.

PAL-N
: Sets the video signal to PAL-N.

SECAM : Sets the video signal to SECAM.
Resetting various settings/
Restoring this product to the
default settings
You can restore settings or recorded content to the default
settings. Various methods are used to clear user data.
Method 1: Remove the vehicle battery
Resets various settings registered to this product.
p
The settings configured on the “ Theme ” screen are not
reset.
Method 2: Initialise from the “System” menu
Method 3: Press the RESET button
 Resetting the microprocessor on page 4
Restoring the default settings
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
CAUTION
Do not turn off the engine while restoring the settings.
1 Display the “ System ” setting screen.
2 Touch [ Restore Settings ].
A message confirming whether to initialise the settings appears.
3 Touch [ Restore ].
p
The source is turned off and the Bluetooth connection is
disconnected before the process starts.
Other functions
24 < QRD3363-A > < QRD3363-A >
Common
operations
Other functions Connection