Operation
Push
M.C.
down.
Push and hold
M.C.
up.
#
Press
M.C.
to display the next page.
Using Bluetooth telephone
This function is available only for MVH-8250BT.
Important
!
Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine run-
ning can drain the battery power.
!
Operations may vary depending on the kind of
cellular phone.
!
Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe place
when using these advanced operations.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.
1
Connection
Operate the Bluetooth telephone connection
menu. Refer to
2
Function settings
Operate the Bluetooth telephone function menu.
Refer to
Basic Operations
Making a phone call
1
Refer to
Answering an incoming call
1
When a call is received, press
M.C.
!
You can also perform this operation by push-
ing
M.C.
up.
Ending a call
1
Press
M.C.
Rejecting an incoming call
1
When a call is received, push
M.C.
down.
Answering a call waiting
1
When a call is received, press
M.C.
!
You can also perform this operation by push-
ing
M.C.
up.
Switching between callers on hold
1
Push
M.C.
up.
Canceling call waiting
1
Push
M.C.
down.
Adjusting the other party
’
s listening volume
1
Push
M.C.
left or right while talking on the
phone.
Turning private mode on or off
1
Push and hold
M.C.
up while talking on the
phone.
Notes
!
If private mode is selected on the cellular
phone, hands-free phoning may not be avail-
able.
!
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
En
11
English
Section
03
Operating this unit
