16
En
*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings
*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings
*3 Not available when [OFF] is selected in [SUB.W].
You can also access to these menus when the unit is turned off.
SUB.W CTRL
*2*3
Cut-off frequency:
[50HZ],
[63HZ], [80HZ], [100HZ],
[125HZ], [160HZ], [200HZ]
Output level:
[–24] to [+6]
Slope level:
[–12], [–24]
Only frequencies lower than those in the
selected range are output from the
subwoofer.
BASS BOOST
[0] to [+6]
Select the bass boost level.
HPF SETTING
Cut-off frequency:
[OFF],
[50HZ], [63HZ], [80HZ],
[100HZ], [125HZ], [160HZ],
[200HZ]
Slope level:
[–12], [–24]
Only frequencies higher than the high-pass
filter (HPF) cutoff are output from the
speakers.
SLA
[+4] to [–4]
Adjust the volume level for each source
except FM.
Each of the below combinations are set to
the same setting automatically.
•
USB, iPod, ANDROID, and APP (iPhone)
•
BT AUDIO, and APP (Android)
SYSTEM settings
Menu Item
Description
Menu Item
Description
CLOCK SET
Set the clock (page 5).
12H/24H
[12H], [24H]
Select the time notation.
AUTO PI
[ON], [OFF]
Search for a different station with the same
programming, even if using a preset
station.
AUX
[ON], [OFF]
Set to [ON] when using an auxiliary device
connected to the unit.
USB AUTO
[ON], [OFF]
Select [ON] to automatically switch to
[USB] source when a USB device/iPod is
connected to the unit.
Select [OFF] when a USB device/iPod is
being connected to the unit just for
charging.
BT AUDIO
[ON], [OFF]
Set the Bluetooth signal on/off.
APP
(Only for MVH-289BT)
[ON], [OFF]
Set the Bluetooth APP mode on/off.
BT MEM CLEAR
[YES], [CANCEL]
Clear the Bluetooth device data (device list,
PIN code, call history, phone book, preset
phone numbers) stored in the unit.
[CLEARED] appears when data is
successfully deleted.
BT VERSION
Displays the system version of the unit and
the Bluetooth module.
