- 12 -
En
gl
is
h
NOTES
•
Depending on the device, the PIN code is required in step 7. In this case, input [0000].
•
Only one single device can be paired/registered at any one time. The previously paired/registered
device information is overwritten/deleted when a new device is paired/registered to this unit.
•
Disconnect a registered device in the [BT CON] menu when you register a new device.
TIP
The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so,
[VISBL] in the Bluetooth settings needs to be set to [ON]. For details on a Bluetooth device operations,
refer to the operating instructions supplied with the Bluetooth device.
Bluetooth settings
1
Press
to display the phone menu.
2
Turn the
M.C.
dial to select [BT SETUP], then press to confirm.
First, make a Bluetooth connection with the Bluetooth telephone (page 11).
Important
•
Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running
can drain the vehicle’s battery.
•
Be sure to park your vehicle in a safe place and apply the parking brake before operation.
Menu Item
Description
BT CON
Display the paired Bluetooth devices. “*” appears on the device
name when the Bluetooth connection is established.
[ON], [OFF]
ADD DEV
Register a new device.
A CON
Select [ON] to connect to a Bluetooth device automatically.
[ON], [OFF]
VISBL
Select [ON] so that a Bluetooth device can detect the unit.
[ON], [OFF]
PIN CODE
Change the PIN code.
1
Press the
M.C.
dial to display the setting mode.
2
Turn the
M.C.
dial to select a number.
3
Press the
M.C.
dial to move the cursor to the next position.
4
After inputting the PIN code, press and hold the
M.C.
dial.
DEV. INFO
Switch the device information on the display between the
device name and Bluetooth device address.
Bluetooth telephone
