Pioneer KURO PDP-LX508D, Service Manual

Page: 157 / 175

PDP-LX5080D
157
5 6 7 8
5 6
7
8
C
D
F
A
B
E
9.3.12 QSI (INPUT SIGNAL DATA)
9.3.13 DRV (PANEL DRIVE-POWER ON / OFF)
Data Arrangement
Data
Length
Output Example
ECO 3 Byte QSI
1 Type of drive sequence 3 Byte 60V
2 Standard/nonstandard 1 Byte S
3 Type of ABL/WB tables 2 Byte T1
4 Total value of PCN 4 Byte 0256
5 Total value of PRH 4 Byte 0256
6 Total value of PGH 4 Byte 0256
7 Total value of PBH 4 Byte 0256
8 Total value of PBR 4 Byte 0512
9 Total value of PRL 4 Byte 0512
10 Total value of PGL 4 Byte 0512
11 Total value of PBL 4 Byte 0512
12 Total value of ABL 3 Byte 128
13 Detection of V frequency 4 Byte 6002
14 Reserved 1 Byte
∗
15 Reserved 3 Byte
∗∗∗
16 Obtained APL data 4 Byte 1023
17 Number of SUS pulses 4 Byte 0457
18 Result of detection of still picture 1 Byte 1
19 Result of detection of cracking in the panel 1 Byte 1
20 Result of detection for scanning protection 1 Byte 1
21 Result of detection for external protection 1 Byte 1
22 Transition of protection operation 1 Byte 0
23 Reserved 4 Byte
∗∗∗∗
CS 2 Byte 27
Command
Format
Effective Operation
Modes
Function Remarks
[QSI] All operations To acquire all data on input video signals Return data: 3 (ECO) + 66 (DATA) + 2 (CS) = 71 Byte
The command QSI is for acquiring all data on input video signals.
At standby mode, when 10 seconds passed after
issuing [DR
V +S00], command becomes invalid.
Command
Format
Effective Operation
Modes
Function Remarks
[DR V +S00] Every time DRI V E OFF
[DR V +S01] Every time DRI V E O N (default)
Drive O N /OFF: O N /OFF control of panel drive-power system
The DRI V E OFF status established by the DR V S00 command is canceled when the power cord is unplugged, the Main
Power switch is set to OFF, or 10 seconds or more has elapsed without any operation in Standby mode. The DRI V E OFF key
on the remote control unit for servicing functions the same as the DR V S00 command. (A function equivalent to that of the
DR V S01 command [DRI V E O N ] is not available with the remote control unit for servicing.)