Setting up
08
34
En
Note
• Five minutes before the system is placed into the standby mode, a message
appears every minute.
Power Management (PC source only)
The system will be automatically placed into the standby mode when no signal is
received from the personal computer.
1
Repeat steps 1 to 3 provided for
Energy Save
.
2
Select “Power Management” (
/
then ENTER).
3
Select “On” or “Off” (
/
then ENTER).
4
Press HOME MENU to exit the menu.
Note
• This function is not selectable when the PC is connected to the HDMI
terminal.
Picture Off
To save energy and extend the life of your flat screen TV, have the screen turn Off.
To deactivate the screen, follow the steps below.
1
Press TOOLS.
The TOOLS Menu appears on screen.
2
Select “Picture Off” (
/
then ENTER).
The screen display turns Off.
To restore the screen display, press any buttons other than
i
+
/
i
–
and
e
.
Note
• The Picture Off setting is not memorised by the system.
Item
Description
Off (default)
No power management
On
• Places the system into the standby mode when no signal is
received from the personal computer for eight minutes.
• Even when you start using the computer and a signal is
received again, the system stays off.
• The system is switched on again by pressing
STANDBY/ON
on
the flat screen TV or
TV
a
on the remote control unit.
