Pioneer GM-3400T, Owner'S Manual

Page: 10 / 96

2 Twist the battery wire, ground wire
and system remote control wire.
Twist
3 Attach lugs to wire ends. Lugs not sup-
plied.
Use pliers, etc., to crimp lugs to wires.
1
Lug
2
Battery wire
3
Ground wire
4 Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
1
System remote control terminal
2
GND terminal
3
Power terminal
4
Terminal screws
5
Battery wire
6
Ground wire
7
System remote control wire
Connecting the speaker
output terminals
1 Expose the end of the speaker wires
using nippers or a cutter by about 10 mm
and twist.
Twist
2 Attach lugs to speaker wire ends. Lugs
not supplied.
Use pliers, etc., to crimp lugs to wires.
1
Lug
2
Speaker wire
3 Connect the speaker wires to the
speaker output terminals.
Fix the speaker wires securely with the term-
inal screws.
Connecting the units
En
10
Section
03