GM-3400T/XJUC
8
1
2
3
4
1
2
3
4
C
D
F
A
B
E
2. SPECIFICATIONS
2.1 SPECIFICATIONS
Power source...........................14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system.................Negative type
Current consumption .......... 15 A (at continuous power,
4 ohm)
Average current drawn........ 4 A (4 ohm for two channels)
7.8 A (4 ohm for one channel)
Fuse ......................................... 25 A × 1
Dimensions (W × H × D) ... 263 mm × 61 mm × 206
mm(10-3/8 in. × 2-3/8 in. ×
8-1/8 in.)
Weight ..................................... 2 kg (4.4 lbs)
(Leads for wiring not in-
cluded)
Maximum power output ...... 120 W × 2 (4 ohm)
/ 350 W × 1 (4 ohm)
Continuous power output ..60 W × 2 (at 14.4 V, 4 ohm
, 20 Hz to 20 kHz 0.2% THD)
175 W × 1 (at 14.4 V, 4 ohm
, 20 Hz to 20 kHz 0.8% THD)
85 W × 2 (at 14.4 V, 2 ohm
, 20 Hz to 20 kHz 0.8% THD)
Load impedance ................... 4 ohm (2 ohm to 8 ohm allowable)
(Bridge connection: 4 ohm to 8
ohm allowable)
Frequency response............ 10 Hz to 50 kHz (+0 dB, –1
dB)
Signal-to-noise ratio............ 95 dB (IHF-A network)
Distortion ................................ 0.01 % (10 W, 1 kHz)
Separation .............................. 70 dB (1 kHz)
Low pass filter:
Cut off frequency ......... 80 Hz
Cut off slope .................. –12 dB/oct
Gain control:
RCA ................................. 200 mV to 6.5 V
Speaker ........................... 0.8 V to 26 V
Maximum input level / impedance:
RCA .................................. 6.5 V / 22 k ohm
Speaker ............................ 26 V / 90 k ohm
CEA2006 Specifications
Power output .......................... 60 W RMS × 2 Channels (at
14.4 V, 4 ohm and
1 % THD
+N)
175 W RMS × 1 Channels
(at 14.4 V, 4 ohm BRIDGE and
1 % THD+N)
85 W RMS × 2 Channels (at
14.4 V, 2 ohm and
1 % THD
+N)
S/N ratio .................................. 75 dBA (reference: 1 W into
4 ohm)
Notes
•
Specifications and the design are subject to
modifications without notice due to improve-
ments.
•
The average current drawn is nearly the maxi-
mum current drawn by this unit when an
audio signal is input. Use this value when
working out total current drawn by multiple
power amplifiers.
Backup current ...................... 0.1 mA or less
GM-3400T/XJUC
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
