Pioneer FH-X500UI, Owner'S Manual

Page: 14 / 80

Black plate (14,1)
When you do not want low sounds from the sub-
woofer output frequency range to play from the
front or rear speakers, turn on the HPF (high pass
filter). Only frequencies higher than those in the
selected range are output from the front or rear
speakers.
1
Press M.C. to display the setting mode.
2
Press M.C. to cycle between the following:
Cut-off frequency
—
Slope level
3
Turn M.C. to select the desired setting.
Cut-off frequency:
OFF
—
50HZ
—
63HZ
—
80HZ
—
100HZ
—
125HZ
—
160HZ
—
200HZ
Slope level:
–
6
— –
12
SLA (source level adjustment)
SLA
(Source level adjustment) lets you adjust the
volume level of each source to prevent radical
changes in volume when switching between sour-
ces.
!
Settings are based on the FM volume level,
which remains unchanged.
!
The AM volume level can also be adjusted with
this function.
!
When selecting FM as the source, you cannot
switch to
SLA .
!
USB
,
iPod
and
PANDORA
are all set to the
same setting automatically.
1
Press M.C. to display the setting mode.
2
Turn M.C. to adjust the source volume.
Adjustment range: +4 to
–
4
System menu
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select SYSTEM.
3 Turn M.C. to select the system menu
function.
Once selected, the following system menu func-
tions can be adjusted.
!
BT AUDIO , BT MEM CLEAR and
BT VERSION are not available for FH-X500UI.
CLOCK SET (setting the clock)
1
Press
M.C.
to display the setting mode.
2
Press M.C. to select the segment of the clock
display you wish to set.
Hour
—
Minute
3
Turn M.C. to adjust the clock.
12H/24H (time notation)
1
Press
M.C.
to select the desired setting.
12H
(12-hour clock)
—
24H
(24-hour clock)
INFO DISPLAY (sub information)
The type of text information displayed in the sub
information section can be toggled.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the desired setting.
SPEANA
—
LEVEL METER
—
SOURCE
—
CLOCK
—
OFF
!
The signal bar indicator displays for
SPEANA
or LEVEL METER when the source is set to
TUNER .
AUX (auxiliary input)
Activate this setting when using an auxiliary de-
vice connected to this unit.
1
Press M.C. to turn AUX on or off.
BT AUDIO
(Bluetooth audio activation)
You need to activate the
BT AUDIO
source in order
to use a Bluetooth audio player.
1
Press M.C. to turn the BT AUDIO source on or
off.
BT MEM CLEAR (clearing the Bluetooth device
data stored on this unit)
Bluetooth device data stored on this unit can be
cleared. To protect personal information, we rec-
ommend that you clear this data before transfer-
ring this unit to other persons. The following types
of data on this unit will be cleared in such cases.
!
Device list
!
PIN code
!
Call history
!
Phone book
!
Preset phone numbers
1
Press
M.C.
to show the confirmation display.
YES is displayed. Clearing memory is now on
standby.
If you do not want to clear the Bluetooth device
data stored on this unit, turn
M.C. to display
CANCEL
and press it again to select.
2
Press M.C. to clear the memory.
CLEARED is displayed and the Bluetooth de-
vice data is cleared.
!
While this function is in use, do not turn
off the engine.
BT VERSION (Bluetooth version display)
You can display the system versions of this unit
and of Bluetooth module.
1
Press
M.C.
to display the information.
Selecting the key color
You can select desired colors for the keys of this
unit.
1 Press M.C. to display the main menu.
2 Turn M.C. to display ILLUMI and press to
select.
3 Turn M.C. to display KEY COLOR and
press to select.
4 Turn M.C. to select the illumination color.
You can select any one of the options in the fol-
lowing list:
!
Preset colors (ranging from
WHITE
to
ROSE
)
!
SCAN (cycle through all colors)
!
Sets of colors ( WARM , AMBIENT , CALM )
!
CUSTOM (customized illumination color)
Notes
!
When SCAN is selected, the system auto-
matically cycles through the preset colors.
!
When WARM is selected, the system auto-
matically cycles through the warm colors.
!
When AMBIENT is selected, the system au-
tomatically cycles through the ambient col-
ors.
!
When CALM is selected, the system auto-
matically cycles through the calm colors.
!
When CUSTOM is selected, the customized
color saved is selected.
Selecting the display color
You can select the desired colors for the display
of this unit.
1 Press M.C. to display the main menu.
2 Turn M.C. to display ILLUMI and press to
select.
3 Turn M.C. to display DISP COLOR and
press to select.
4 Turn M.C. to select the illumination color.
You can select any one of the options in the fol-
lowing list:
!
Preset colors (ranging from WHITE to ROSE )
!
SCAN (cycle through all colors)
!
Sets of colors (
WARM
,
AMBIENT
,
CALM
)
!
CUSTOM (customized illumination color)
Operating this unit
14
Section
Operating this unit
En
02
<QRD3222-A>14