138
Setup
Audio Adjust
DTS/IMAX
Change the setting of when DTS signals are input.
Dialog Control (Default Value: 0 dB)
You can increase the volume of dialog portion of the audio up to 6 dB by 1 dB
step so that you can hear the dialog easily in noisy atmosphere.
•
This cannot be set for content other than DTS:X.
•
Depending on the content, this function may not be selected.
IMAX Mode (Default Value: Auto)
Set the IMAX sound mode.
Auto
IMAX sound mode is automatically applied when IMAX
content is detected.
On
In cases when this unit is unable to recognize IMAX content,
you can apply the IMAX sound mode by turning this setting
"On".
Off
Disable this function
IMAX User Setting (Default Value: Auto)
When playing IMAX content with the IMAX sound mode, select whether to
automatically apply the speaker setting recommended by IMAX or to set it
manually.
•
This cannot be selected when the "IMAX Mode" is "Off".
Auto
To use the speaker setup recommended by IMAX.
Manual
To manually set "IMAX Bass Feeding" and "IMAX LFE Mute
Level".
IMAX Bass Feeding (Default Value: On)
Set the route for the bass component of the audio.
•
This cannot be selected when the "IMAX User Setting" is "Auto".
On
The bass component of each channel is output according to
the crossover settings (
Off
Only the LFE signal is output.
IMAX LFE Mute Level (Default Value: 0 dB)
•
This cannot be selected when the "IMAX User Setting" is "Auto".
You can set the volume for the LFE when IMAX signals are being input. Select
"–∞ dB" or a value between "0 dB" and "-20 dB".
