Pioneer ELITE VSX-LX304 Instruction Manual Download Page 82

Page: 82 / 180

≫

≫

≫

≫

≫

≫

Supported Audio Formats

This unit supports the following music file formats. Remote play of FLAC and

DSD is not supported.
MP3 (.mp3/.MP3):

• Supported formats: MPEG-1/MPEG-2 Audio Layer 3

•

Supported sampling rates: 44.1 kHz, 48 kHz

•

Supported bitrates: Between 8 kbps and 320 kbps, and VBR

WMA (.wma/.WMA):

•

Supported sampling rates: 44.1 kHz, 48 kHz

•

Supported bitrates: Between 5 kbps and 320 kbps, and VBR

• WMA Pro/Voice/WMA Lossless formats are not supported.

WAV (.wav/.WAV):

WAV files contain uncompressed PCM digital audio.

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,

192 kHz

•

Quantization bit: 8 bit, 16 bit, 24 bit

AIFF (.aiff/.aif/.AIFF/.AIF):

AIFF files contain uncompressed PCM digital audio.

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,

192 kHz

•

Quantization bit: 8 bit, 16 bit, 24 bit

AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/.M4A/.MP4/.3GP/.3G2):

• Supported formats: MPEG-2/MPEG-4 Audio

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz

•

Supported bitrates: Between 8 kbps and 320 kbps, and VBR

FLAC (.flac/.FLAC):

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz,

192 kHz

•

Quantization bit: 8 bit, 16 bit, 24 bit

LPCM (Linear PCM):

•

Supported sampling rates: 44.1 kHz, 48 kHz

•

Quantization bit: 16 bit

Apple Lossless (.m4a/.mp4/.M4A/.MP4):

•

Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz

•

Quantization bit: 16 bit, 24 bit

DSD (.dsf/.dff/.DSF/.DFF):

• Supported formats: DSF/DSDIFF

•

Supported sampling rates: 2.8 MHz, 5.6 MHz, 11.2 MHz

•

When playing files recorded with VBR (Variable bit-rate), the playback time

may not be displayed correctly.

• Remote playback does not support the gapless playback.

Summary of Contents for ELITE VSX-LX304





















































































































































































Search results

Summary of Contents for ELITE VSX-LX304

Reviews:

Related manuals for ELITE VSX-LX304

Brands by name

Popular brands

Pioneer ELITE VSX-LX304, Instruction Manual

Search results

Summary of Contents for ELITE VSX-LX304

Reviews:

Related manuals for ELITE VSX-LX304

Brands by name

Popular brands