Pioneer ELITE VSX-LX304 Instruction Manual Download Page 155

Page: 155 / 180

155

≫

≫

≫

≫

≫

≫

Bluetooth

Setting Item

Default Value

Setting Details

Bluetooth

Select whether or not to use the BLUETOOTH

function.

"On": Enables connection with a BLUETOOTH

wireless technology enabled device by using the

BLUETOOTH function. Select "On" also when

making various BLUETOOTH settings.

"Off": When not using the BLUETOOTH function

Auto Input

Change

When a BLUETOOTH-enabled device is played

while it is connected to the unit, the input of the unit

can be automatically switched to "BLUETOOTH".

"On": The input is automatically set to

"BLUETOOTH" responding to the playback

operation of the BLUETOOTH-enabled device.

"Off": The function is disabled.

•

If the input is not switched automatically, set to

"Off" and change the input manually.

Auto Reconnect

This function automatically reconnects to the

BLUETOOTH wireless technology enabled device

connected last when you change the input to

"BLUETOOTH".

"On": When this function is to be used

"Off": When this function is not to be used

•

This may not work with some BLUETOOTH

wireless technology enabled devices.

Setting Item

Default Value

Setting Details

Pairing

Information

You can initialize the pairing information saved on

this unit.

Pressing ENTER when "Clear" is displayed

initializes the pairing information stored in this unit.

•

This function does not initialize the pairing

information on the BLUETOOTH wireless

technology enabled device. When pairing the

unit again with the device, be sure to clear

the pairing information on the BLUETOOTH

wireless technology enabled device in advance.

For information on how to clear the pairing

information, refer to the BLUETOOTH wireless

technology enabled device's instruction manual.

Device

Displays the name of the BLUETOOTH wireless

technology enabled device connected to the unit.

•

The name is not displayed when "Status" is

"Ready" and "Pairing".

Status

Displays the status of the BLUETOOTH wireless

technology enabled device connected to the unit.

"Ready": Not paired

"Pairing": Paired

"Connected": Successfully connected

•

Wait for a while if "Bluetooth" cannot be selected. It will appear when the BLUETOOTH

function is started up.

Summary of Contents for ELITE VSX-LX304





















































































































































































Search results

Summary of Contents for ELITE VSX-LX304

Reviews:

Related manuals for ELITE VSX-LX304

Brands by name

Popular brands

Pioneer ELITE VSX-LX304, Instruction Manual

Search results

Summary of Contents for ELITE VSX-LX304

Reviews:

Related manuals for ELITE VSX-LX304

Brands by name

Popular brands