Using other functions
08
77
En
Switching the speaker terminals
If you selected
Speaker B
at
Speaker system
setting
on page 105, you can switch between
speakers using the
SPEAKERS
button. If you
selected
Normal(SB/FH)
,
Normal(SB/FW)
,
Front Bi-Amp
or
ZONE 2
, the button will
simply switch your main speaker terminals on
or off. The options below are for the
Speaker B
setting only.
1
•
Use SPEAKERS on the front panel to
select a speaker terminal setting.
As mentioned above, if you have selected
Normal(SB/FH)
or
Normal(SB/FW)
, the
button will simply switch your main speaker
terminals (A) on or off.
Press repeatedly to choose a speaker terminal
option:
•
SP
A
– Sound is output from the A-
speaker terminals (up to 7 channels
(including surround back channels),
depending on the source).
•
SP
B
– Sound is output from the two
speakers connected to the B-speaker
terminals. Multichannel sources will not be
heard.
•
SP
AB
– Sound is output from the A-
speaker terminals (up to 5 channels,
depending on the source), the two
speakers connected to the B-speaker
terminal, and the subwoofer. The sound
from B-speaker terminals will be the same
as the sound from the A-speaker terminals
(multichannel sources will be downmixed
to 2 channels).
•
SP
(off) – No sound is output from the
speakers.
Using the MULTI-ZONE controls
The following steps use the front panel controls
to adjust the sub zone volume and select
sources. See
MULTI-ZONE remote controls
on
page 78.
1
Press MULTI-ZONE ON/OFF on the front
panel.
Each press selects a MULTI-ZONE option:
•
ZONE 2 ON
– Switches the MULTI-ZONE
feature on
•
MULTI ZONE OFF
– Switches the MULTI-
ZONE feature off
The
MULTI-ZONE
indicator lights when the
MULTI-ZONE control has been switched ON.
2
Press MULTI-ZONE CONTROL on the
front panel.
• When the receiver is on,
2
make sure that
any operations for the sub zone are done
while
ZONE 2
shows in the display. If this is
not showing, the front panel controls affect
the main zone only.
3
Use the INPUT SELECTOR dial to select
the source for the sub zone.
For example,
ZONE 2 CD-R
sends the source
connected to the
CD-R
inputs to the sub room
(
ZONE 2
).
• If you select
TUNER
, you can use the tuner
controls to select a preset station (see
Saving station presets
on page 52 if you’re
unsure how to do this).
3
•
VSX-30 model only:
iPod/USB, INTERNET
RADIO and SIRIUS function cannot be
selected for the MULTI-ZONE feature.
Note
1 • The subwoofer output depends on the settings you made in
Manual speaker setup
on page 104. However, if
SP
B
is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed).
• All speaker systems (except
Speaker B
connections) are switched off when headphones are connected.
2 If the receiver is in standby, the display is dimmed, and
ZONE 2 DVD
for example shows in the display.
3 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also
changes the station in the other zone. Please be careful not to change stations when recording a radio broadcast.
VSX-31_30_UC.book 77 ページ ２０１０年８月２５日 水曜日 午前９時２８分
