Pioneer Elite SC-LX704 Instruction Manual Download Page 139

Page: 139 / 225

139

≫

≫

≫

≫

≫

≫

Listening Mode Effects

In alphabetical order

Action

Mode suitable for movies with a lot of action scenes.

AdvancedGame

Mode suitable for game content.

Classical

Suitable for classical or operatic music. This mode emphasizes the surround

channels in order to widen the sound image, and simulates the natural

reverberation of a large hall.

Atmos

Since this mode calculates the positional data of audio recorded in Dolby Atmos

audio in real-time and outputs it from appropriate speakers, you can enjoy the

natural and stereophonic sound field of Dolby Atmos with any speaker layout

including connection of only front speakers. Also, the Dolby Atmos sound design

can be reproduced more faithfully by connecting surround back speakers or

height speakers. You can select this mode when inputting the Dolby Atmos audio

format.

Unlike existing surround systems, Dolby Atmos does not rely on channels, but

rather enables the accurate placement of sound objects that have independent

motion in a 3D space with even greater clarity. Dolby Atmos is an optional

audio format for Blu-ray Discs and achieves a more stereophonic sound field by

introducing a sound field above the listener.
According to the speaker layout, the following listening modes are displayed.

–

Atmos 2.0/2.1/2.2

: When only front speakers are installed

–

Atmos 3.0/3.1/3.2

: When front speakers and center speaker are installed

–

Atmos 4.0/4.1/4.2

: When front speakers and surround speakers are

installed

–

Atmos 5.0/5.1/5.2

: When front speakers, center speaker and surround

speakers are installed

–

Atmos 6.0/6.1/6.2

: When front speakers, surround speakers and

surround back speakers are installed

–

Atmos 7.0/7.1/7.2

: When front speakers, center speaker, surround

speakers and surround back speakers are installed

–

Atmos 2.0.2/2.1.2/2.2.2

: When front speakers and height speakers are

installed

–

Atmos 3.0.2/3.1.2/3.2.2

: When front speakers, center speaker and

height speakers are installed

–

Atmos

: Selectable in the "4.1.2 ch", "5.1.2 ch", "6.1.2 ch", "7.1.2 ch",

"4.1.4 ch", "5.1.4 ch", "6.1.4 ch" or "7.1.4 ch" setting with surround speakers

and height speakers installed.

• To enable transfer of this audio format, connect via an HDMI cable and set the

audio output on the player to Bitstream output.

• When "Speaker Virtualizer" (

p163

) is set to "Off" (Default: On), modes

other than Atmos cannot be selected.

DD (Dolby Audio - DD)

This mode faithfully reproduces the sound design recorded in the Dolby Digital

audio format.

Dolby Digital is a multi-channel digital format developed by Dolby Laboratories,

Inc. and is widely adopted for use in movie production. It is also a standard audio

format for DVD-Video and Blu-ray Discs. It is possible to record a maximum of

5.1 channels on a DVD-Video or Blu-ray Disc; two front channels, one center

channel, two surround channels, and the LFE channel dedicated to the bass

region (sound elements for the subwoofer).

• To enable transfer of this audio format, connect via a digital cable and set

audio output on the player to Bitstream output.

DD+ (Dolby Audio - DD+)

This mode faithfully reproduces the sound design recorded in the Dolby Digital

Plus audio format.

The Dolby Digital Plus format has been improved based on Dolby Digital,

increasing the number of channels and endeavoring to improve sound quality

by giving more flexibility in data bit rates. Dolby Digital Plus is an optional audio

Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands