Pioneer Elite SC-LX704 Instruction Manual Download Page 115

Page: 115 / 225

115

≫

≫

≫

≫

≫

≫

Connecting the Sonos System for Playback

By connecting this unit and a Sonos Connect, you can transfer music and sound

sources on the Sonos App to this unit. By going through the Sonos Connect, you

can play this unit through other Sonos devices in the network in the same group,

or you can just play on this unit. Furthermore, by connecting this unit and the

Sonos Connect to the same network, the power of this unit turns on automatically

when music starts playing, and the linked function to switch input works.

• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is

set to "Off " in the Home, manually turn the unit on and then press NET on the

remote controller. In the factory default setting, the Network Standby function (

p169

) is set to On.

Necessary Equipment

•

Sonos Connect

• RCA Audio Cable (Supplied with Sonos Connect)

How to Connect This Unit and Sonos

Connect

Connect the Sonos Connect to the AUDIO IN jack of this unit with the RCA

audio cable supplied with the Sonos Connect. Any input can be used other

than the PHONO input.

• You can also connect with a digital cable. For details, refer to the instruction

manual of the Sonos.

• You can rename the input that is displayed on the unit to a more logical

name. For example, you can change the name of input that the Sonos

Connect is plugged into from "CD" (or other input) to "SONOS". Press the

button on the remote controller to display the Home screen, and select

"System Setup" - "Source" - "Name Edit" to change the name.

Setting Up

A setup is required to play Sonos on this unit. Make the setting according to the

following procedure.

1. Press the

button on the remote controller to display the Home screen,

select "System Setup" - "Hardware" - "Works with SONOS", and press the

ENTER button.

Select the following items with the cursors

/ and set each item.

Input Selector:

Enable the interlocking function with the Sonos Connect. With the cursors

, select the input selector to which the Sonos Connect is connected.

Connected Device:

Press the ENTER button to display Sonos devices connected to the same

network as the network of this unit. Select the Sonos Connect connected to

the unit and press the ENTER button.

• Products (e.g. Play:3 unequipped with an output terminal) other than the

Sonos Connect are also displayed in the device list and selectable. In

that case, when playback on the Sonos side starts, the input is switched,

however, audio is not output. Select the room name of the connected

Sonos Connect.

• Up to 32 devices can be displayed on the Sonos product list screen. If you

cannot find the Sonos Connect to be interlocked, return to the previous

screen, turn off the product you do not want to interlock, and try again.

Output Zone:

With the cursors /

, select the ZONE where you want to listen to the music.

"Main": Outputs audio only to the main room (where this unit is located).

"Zone 2": Outputs audio only to the separate room (ZONE 2).

"Main/Zone 2": Outputs audio to both the main room and separate room.

"Zone 3": Outputs audio only to the separate room (ZONE 3).

"Main/Zone 3": Outputs audio to both the main room and separate room

(ZONE 3).

"Zone 2/Zone 3": Outputs audio to both the separate rooms (ZONE 2 and

ZONE 3).

Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands