Pioneer Elite SC-LX704 Instruction Manual Download Page 107

Page: 107 / 225

107

≫

≫

≫

≫

≫

≫

Playing Back

Perform the following procedure when this unit is on.

Switch the input on the TV to the input connected to the unit.

Start the server (Windows Media

Player 11, Windows Media

Player 12, or

NAS device) containing the music files to play.

Make sure that the PC or NAS is properly connected to the same network as

this unit.

Press NET to display the network service list screen.

•

If the "NET" indicator on the display blinks, the unit is not properly

connected to the network. Check the connection.

With the cursors, select "Music Server", and then press ENTER.

/ / /

ENTER

NET

Inputs

HDMI 1

HDMI 2

HDMI 3

INPUT

Network

TV’s REMOTE

The illustration shows an image.

Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands