100
En
Useful Remote Control Features
13
CBL/SAT control buttons
When the CBL/SAT function has been preset by the remote
control’s learning function, the remote control buttons
function as shown below.
• When the
Mode switch
is set to CBL/SAT, the cable
converter or satellite broadcast tuner connected to the
display, use the buttons shown below to operate the device
(
3
,
4
,
5
,
8
and
9
for cable converters and
1
to
7
for satellite
tuners):
• Cable converters or satellite broadcast tuners made by other
manufacturers not listed in the system can be controlled
using the remote control if buttons
1
to
9
have already
learned the functions. See page 92.
1
SAT MENU
Displays the satellite broadcasting menu screen
2
ENTER,
/ / /
ENTER:
Activates the selected function
/ / /
:
Selects items on the SAT GUIDE screen or
SAT MENU screen
3
0 – 9
Press a button (or buttons) that corresponds to the
channel that you want to watch
4
CH +/–
Selects a higher or lower channel
5
SOURCE
Turns the device sending the image On and Off
6
SAT GUIDE
Displays the satellite broadcasting guide screen
• Set up this button with the learning function if necessary
7
RETURN
When the CBL/SAT menu is displayed, restores the
immediately previous screen
8
CH ENTER*
Enters the selected channel with the direct channel
selection buttons
9
CH RETURN*
Switches between the current channel and the previous
channel you were watching
*
Some cable converter manufacturers do not preset
CH
ENTER
and
CH RETURN
. Set up these buttons with the
learning function if necessary.
NOTE
• CABLE and SAT cannot be selected at the same time.
• The color-highlighted buttons on the remote control can
learn the control signal from another device’s remote
control.
4
8
7
6
3
5
2
1
9
Mode switch
(with “CBL/SAT”
selected)
PDP_PRO1540HD.book Page 100 Wednesday, August 2, 2006 6:01 PM
