PRO-150FD
34
1
2
3
4
1
2
3
4
C
D
F
A
B
E
4. DIAGNOSIS
4.1 DIAGNOSIS FLOWCHART
4.1.1 HN MODULE ASSY
< Network operation failure >
Contents via the network server can
not be played!
yes
yes
yes
yes
Can "Home Media Gallery" on "HOME
MENU" GUI be selected?
Then, is the main menu of "Home
Media Gallery" displayed?
By selecting "Media Navigator”, is the
network server name displayed and
selectable?
Confirm that a correct network cable is
used and correctly inserted into both
ethernet terminal.
Note:
When the PDP is connected to a
network hub, a straight cable is
used.
When the PDP is directly connected
to a network server, a cross
(reverse) cable is used.
Confirm that the IP address setting is
properly set up.
Most of the network server has the
setting to register the client or prohibit
the specific client from accessing.
Is there any register restriction in the
server?
Note:
In case of "Windows Media Connect"
server, the number of registerd client
is restricted within 10.
Is the directory in the server displayed?
No
No
Is the target folder or file in the server
surely shared with the network client?
No
yes
If the contents can not be played
though it can be selected, try other
contents.
Then, is there any other contents which
can be played?
Note:
One of the supported video format is
WMV.
Try WMV, except that the server does not
support WMV.
Below is the URL from which some WMV
files of 720p resolution are available.
http://www.microsoft.com/windows/windo
wsmedia/musicandvideo/hdvideo/content
showcase.aspx
The failed contents may be out of
support.
There may be something defective in
HNM ass'y.
Replace the HNM ass'y with another
one.
No
There may be other restriction in the
server.
With examining the user's manual of
the server, check the server operation
in detail.
There may be something defective in
HNM ass'y.
Replace the HNM ass'y with another
one.
No
Before PDP turned on, has the network
server been turned on and connected
to PDP with a network cable?
Note:
The network server should be
connected before the PDP's
power-on.
Jump and refer to the sheet of
"Fundamental operation failure".
yes
yes
yes
Note:
When the DHCP server function is
available in your local network, select
"Automatically acquire IP” in "Network
Setup" menu to use the DHCP client
function of PDP. Most of the
broadband routers have the
DHCP server function.
When the DHCP server function is
not available in the network, it needs
to set an appropriate IP address by
yourself.
In this case, make settings as follows.
Subnet mask:
Use the same as the network server
uses.
IP Address:
Make the same for the network
address part designated by the
Subnet mask.
For the rest, use the number which
has not been used in the network.
All "0" and all "1" in binary can not
be used.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
