43
En
07
Software updating
The player’s software can be updated using one of the
methods shown below.
• Connecting to the Internet.
• Using a USB flash drive.
Product information on this player is provided on the
Pioneer website. Check the website shown on page 7 for
update and service information on your Blu-ray disc
player.
Caution
• Do not perform the actions below while the software
is being updated. Doing so will interrupt updating and
could lead to malfunction.
– Disconnecting a USB memory device
– Unplugging the power cord
– Pressing the reset button.
• There are two processes for software updating,
downloading and updating. Both processes may take
a certain period of time.
• Other operations are defeated during software
updating. Furthermore, updating process cannot be
canceled.
Updating connecting to the Internet
1
Connect to the Internet.
2
When playback is stopped, display the Home
Menu screen.
Press
HOME MENU
.
3
Select and set Initial Setup.
Use
/
to select, then press
ENTER
.
4
Select and set Options
Update
Network
Start.
Use
/
to select, then press
ENTER
.
5
Updating starts.
Press
ENTER
.
• Software updating may take a certain period of time.
• When updating is completed, the unit restarts
automatically.
Updating using a USB flash drive
Note
• When an update file is provided on the Pioneer
website, use your computer to download it onto a
USB flash drive. Carefully read the instructions on
downloading update files provided on the Pioneer
website.
• Store the update file in the root directory of the USB
flash drive. Do not store it within a folder.
• Do not put any files other than the update file on the
USB flash drive.
• This unit supports USB flash drives formatted in
FAT32, FAT16 or NTFS. When formatting a USB flash
drive on your computer, do so with the settings below.
– File system: FAT32
– Allocation unit size: Default allocation size
• Only store the most recent update file on the USB
flash drive.
• Do not use a USB extension cable to connect a USB
flash drive to the player. Using a USB extension cable
may prevent the player from performing correctly.
1
Plug in the USB flash drive on which the update
file is stored.
2
When playback is stopped, display the Home
Menu screen.
Press
HOME MENU
.
3
Select and set Initial Setup.
Use
/
to select, then press
ENTER
.
4
Select and set Options
Update
USB Storage
Start.
Use
/
to select, then press
ENTER
.
5
Updating starts.
Press
ENTER
.
• Software updating may take a certain period of time.
• When updating is completed, the unit restarts
automatically.
Restoring all the settings to
the factory default settings
1
Check that the player’s power is turned on.
2
When playback is stopped, display the Home
Menu screen.
Press
HOME MENU
.
3
Select and set Initial Setup.
Use
/
to select, then press
ENTER
.
4
Select and set Options
Load Default
Next
Screen.
Use
/
to select, then press
ENTER
.
5
Select and set OK.
Use
/
to select, then press
ENTER
.
Note
• After restoring all the settings to the factory default
settings, use
Setup Navigator
to reset the player
(page 21).
• When disposing of the product, we recommend you
reset it to the factory default setting to delete the data.
BDP-80FD_72-BDP80FD-CUXE1_En.book 43 ページ ２０１４年４月２１日 月曜日 午後１時５０分
