Settings
Communication Setup
By connecting to the Internet, you can enjoy BD-LIVE
functions, YouTube videos and text information using
the RSS reader function, as well as update this player’s
software. This section describes the procedure for
making network settings. You can connect to the
Internet either by using a LAN cable or by connecting
a USB Wireless LAN Adaptor to one of the USB ports.
NOTE
Check that LAN cable or USB Wireless LAN Adaptor is
properly connected (page 21).
When USB Wireless LAN Adaptors are connected to both
the USB ports on the player’s front and rear panels, the
USB Wireless LAN Adaptor last connected is used.
Check the following information about the wireless LAN
access point beforehand:
Type of encryption and encryption key
SSID (network name)
For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
IP address, netmask, gateway, DNS IP address
If specified by the provider, check the IP address and proxy
server settings beforehand.
•
•
•
−
−
•
−
•
Selecting the connection method
Press
HOME MENU
to display the HOME
MENU screen.
Press
to select “Settings”, then
press
ENTER
.
Press
to select “Communication Setup”,
then press
ENTER
.
Press
to select “Cable/Wireless Select”,
then press
ENTER
.
Press
to select the connection type, then
press
ENTER
.
Cable: Select this to connect to the network using a
LAN cable.
Wireless: Select this to connect to the network using a
USB Wireless LAN Adaptor.
Changing the communications
settings
Press
HOME MENU
to display the HOME
MENU screen.
Press
to select “Settings”, then
press
ENTER
.
Press
to select “Communication Setup”,
then press
ENTER
.
Press
to select the connection method you
want to set, then press
ENTER
.
Ethernet Setup(Cable): Change the settings for
connecting to the network using a LAN cable.
Ethernet Setup(Wireless): Change the settings for
connecting to the network using a USB Wireless LAN
Adaptor.
Press
to select “Change”, then press
ENTER
.
Current Ethernet setup info.
IP Address : Auto Setup
Netmask : Auto Setup
Gateway : Auto Setup
DNS
: Auto Setup
Proxy :
Not
Use
Change
Initialize
For initializing the current setting, select “Initialize”,
then press
ENTER
.
When “Ethernet Setup(Cable)” was selected at step 4,
proceed to step 10.
Press
to select the access point, then
press
ENTER
.
Press
to set the type of encryption, then
press
ENTER
.
When “OPEN” is selected, proceed to step 9.
When “WEP”, “WPA” or “WPA2” is selected, input
the encryption key. Select “security key”, then press
ENTER
. For instructions on inputting characters, see
page 50.
Press
to select “Next”, then press
ENTER
.
Press
ENTER
to test the connection.
1
2
3
4
5
•
•
1
2
3
4
•
•
5
•
•
6
7
•
•
8
9
48
Reset,
Not Reset
Item
System Reset
You can reset all settings to the factory presets.
Netflix Deactivate
When you select “Netflix Deactivation”, you can
deactivate your Netflix information on the player by
selecting “Yes”.
