Pioneer DVR-SK12D, Operating Instructions Manual

Page: 7 / 68

7
English
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model
properly. After you have finished reading the instructions, put them away in a safe place for
future reference.
K015 En
Operating Environment
H045 En
Operating environment temperature and humidity:
+5˚C – +35˚C (+41˚F – +95˚F); less than 85%RH (cooling vents not blocked)
Do not install in the following locations
÷
Location exposed to direct sunlight or strong artificial light
÷
Location exposed to high humidity, or poorly ventilated location
Precautions Regarding Use
7
Pioneer may not be held liable for the loss of any data or any other direct or
indirect damage suffered as the result of the use or breakdown of this prod-
uct. It is strongly recommended that regular backups be taken of all critical
data.
7
Care must be taken not to infringe copyright restrictions under the laws of
each country.
If this device is used to record copyrighted materials, approval must be
obtained from the respective copyright holders. The recording of copyrighted
materials without the express approval of the respective copyright holders
may result in legal penalties. Pioneer disclaims any and all responsibility
for any legal damages resulting from the use of this device in the unauthor-
ized copying of copyrighted materials.
7
All names of corporations, products, and systems listed herein, even when
the (™) or (®) symbols are omitted, should be considered the registered
trademarks of their respective owners.
[FOR NORTH AMERICA MODELS]
CONSULT WITH THE COMPANY SALES
REPRESENTATIVE. “USE ONLY UL LISTED AND
CANADIAN CERTIFIED POWER SUPPLY CORD.”
A POWER SUPPLY CORD TYPE SPT-2, 18 AWG
MINIMUM, 2-WIRE SHALL BE USED WITH THIS
EQUIPMENT.
[FOR EUROPEAN MODELS]
CONSULT WITH THE COMPANY SALES
REPRESENTATIVE. “USE ONLY SAFETY
LICENSED POWER SUPPLY CORD.”
A CERTIFIED POWER SUPPLY CORD IS TO BE
USED WITH THIS EQUIPMENT. FOR A RATED
CURRENT UP TO 6 A, A TYPE NOT LIGHTER
THAN H03VV-F 2X 0.75 mm
2
OR H03VVH2-F 2X
0.75 mm
2
SHALL BE USED.
For pluggable equipment the socket-outlet shall be installed near the equipment and shall be
easily accessible.