Controls and displays
03
21
En
Putting the batteries in the remote
control
1
Open the battery compartment cover on the
back of the remote control.
2
Insert two AA/R6 batteries into the battery
compartment following the indications (
,
) inside
the compartment.
3
Close the cover.
Caution
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the
following:
• Don’t mix new and old batteries together.
• Don’t use different kinds of battery together —
although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of each
battery match the indications in the battery
compartment.
• Remove batteries from equipment that isn’t going to
be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country or
area.
WARNING
• Do not use or store batteries in direct sunlight or
other excessively hot place, such as inside a car or
near a heater. This can cause batteries to leak,
overheat, explode or catch fire. It can also reduce the
life or performance of batteries.
RCS-LX60D_WV.book 21 ページ ２００７年４月２４日 火曜日 午後７時５７分
