Pioneer DV-333 Operating Instructions Manual Download Page 38

Page: 38 / 56

Still Frame/Slow Play/Frame
Advance Playback

– DVD/Video CD

The video images on DVD and Video CD can be viewed
as a still frame, played back at slow speeds and even
advanced frame by frame.

Viewing a still frame

Press

PAUSE

When viewing a DVD, if the paused picture shakes,
select the

[Field]

setting in the Setup screen

Video

[Still Picture]

setting as described in the section

page 29

To return to normal playback

When viewing a still frame playback, pressing

PAUSE

PLAY

restores normal playback operation.

Viewing slow playback

Press and hold STEP/SLOW

during

playback.

• Slow playback is engaged.
• During slow playback, the speed of playback can be

adjusted from 1/2 normal playback speed to 1/16
normal playback speed in four steps using

STEP/SLOW

and

1/16 – 1/8 – 1/4 – 1/2

Press and hold

STEP/SLOW

during DVD

playback.

• Slow playback in the reverse direction is engaged.
• In the reverse direction, the playback speed cannot be

adjusted.

To return to normal playback

When viewing still frames or slow playback, pressing

PLAY

restores normal playback operation.

Frame by frame advance playback:
Viewing one frame at a time

Press

PAUSE

Press

STEP/SLOW

: The picture advances one frame each

time the button is pressed.

STEP/SLOW

: The picture backs up a DVD a few

frames each time the button is
pressed.

To return to normal playback

When viewing frame by frame playback, pressing

PLAY

restores normal playback operation.

RANDOM

PROGRAM SEARCH MODE

+10

CLEAR

REV FWD

PLAY

PAUSE

STOP

STEP/SLOW

NEXT

PREV

RETURN

REPEAT

CONDITION

MEMORY

LAST

MEMORY

ANGLE

SUB TITLE

AUDIO

SETUP

MENU

TOP MENU

DISPLAY

∞

OPEN/
CLOSE

REPEAT

A-B

TER

PLAY

PAUSE

STEP/SLOW

Notes

• There is no sound when viewing still frames or slow

playback, or when advancing one frame at a time.

• Still frame, slow play, or frame advance playback may not

be possible with certain titles. In this case, the

mark is

displayed.

Summary of Contents for DV-333

























































Search results

Summary of Contents for DV-333

Reviews:

Related manuals for DV-333

Brands by name

Popular brands

Pioneer DV-333, Operating Instructions Manual

Search results

Summary of Contents for DV-333

Reviews:

Related manuals for DV-333

Brands by name

Popular brands