
140
DRM-7000, DRM-AF751, DRM-AL751, DRM-AH721, DRM-PW701
How to Install the Additional Power
Supply Unit (DRW-PW701)
Moving the Carriage Base Up and
Down Manually
For Shipping Stopper Screw of the Carriage
Base
Remove the lower left side panel. (four screws)
1
Install the lower left side panel. (four screws)
7
6
5
3
4
Hang up the Additional Power Supply Unit to hooking
screws and tighten the four screws (BBZ30P060FMC).
1. Open the Front Door.
2. Remove the Side Panel, located at lower-right viewed from
the front.
3. Rotate the Pulley with your fingers clockwise to move the
Carriage Base downward, and counterclockwise to move it
upward.
Caution: If the Front Door Switch is set to ON while the power
is on, the Motor Shaft will start rotating.
2
Connect a connector. (for DC output)
3
Insert a connector. (for power supply of Fan Motor)
4
Connect a connector. (for AC input)
5
Tighten the two screws (accessory parts, PMB40P080FMC)
to fix the earth lead wire and the chassis.
6
Pulley
Carriage
Base
upward
Carriage Base
downward
×
2
2
×
2
2
For safety, when moving the unit, fix the Carriage Base by
the shipping stopper screws.