23
En
English
Changing the settings
1 Press the [MIDI] [SETUP (WAKE UP)] button for at
least 1 second.
The [
USER SETUP
] screen is displayed.
!
To display the [
CLUB SETUP
] screen, first turn the unit’s power off,
then press the [
POWER
] button while pressing the [
MIDI
] [
SETUP
(
WAKE UP
)] button.
2 Press the [BEAT
c
,
d
] button.
Select the setting item.
3 Press the [TAP] button.
The screen switches to the setting item’s setting value change screen.
4 Press the [BEAT
c
,
d
] button.
Change the setting value.
5 Press the [TAP] button.
Enter the setting value.
The previous screen reappears.
!
To return to the previous screen without changing the settings, press
the [
AUTO/TAP
] button.
6 Press the [SETUP (WAKE UP)] button.
Close the [
USER SETUP
] screen.
!
To close the [
CLUB SETUP
] screen, press the [
POWER
] button to turn
this unit’s power off.
About the auto standby function
When [
Auto Standby
] is set to [
ON
], the standby mode is set automati-
cally if 4 hours pass with all of the conditions shown below met.
—
That none of this unit’s buttons or controls are operated.
—
That no audio signals of
–10 dB
or greater are input to this unit’s
input terminals.
!
When the [
SETUP
(
WAKE UP
)] button is pressed, the standby mode
is canceled.
!
This unit is shipped with the auto standby function turned on. If you
do not want to use the auto standby function, set [
Auto Standby
] to
[
OFF
].
About the talk over function
The talk over function has the two modes described below.
—
[
ADV
] (advanced talk over): The mid-range only of the sound of chan-
nels other than the [
MIC
] channel is attenuated according to the
[
Talk Over LEVEL
] setting value and output.
dB
Frequency
—
[
NOR
] (normal talk over): The sound of channels other than the [
MIC
]
channel is attenuated according to the [
Talk Over LEVEL
] setting
value and output.
dB
Frequency
Setting preferences
*: Setting upon purchase
Mode
Options
settings
Screen display Setting value
Descriptions
USER SETUP
Fader Start
F.S.
ON
*,
OFF
Turns the fader start function on and off for all DJ players connected to the [
CONTROL
]
terminals.
MIDI CH
MIDI CH
1
* to
16
Sets the MIDI channel.
MIDI Button Type MIDI BT
TGL
*,
TRG
Selects the MIDI signal transmission mode, [
TGL
(
TOGGLE
)] or [
TRG
(
TRIGGER
)].
Talk Over Mode
TLK MOD
ADV
*,
NOR
Selects the talk over function’s mode, [
ADV
(
ADVANCED
)] or [
NOR
(
NORMAL
)].
Talk Over LEVEL
TLK LVL
–6 dB
,
–12 dB
,
–18 dB
*,
–24 dB
Sets the talk over function’s sound attenuation level.
CLUB SETUP
Digital Master
Out Level
DOUT LV
–19 dB
*,
–15 dB
,
–10 dB
,
–5 dB
Sets the maximum level of the sound output from the [
DIGITAL MASTER OUT
] terminals.
1
Digital Master
Out Sampling
Rate
DOUT FS
48 kHz
,
96 kHz
*
Sets the digital signal’s sampling rate.
MASTER ATT.
MST ATT
–6 dB
,
–3 dB
,
0 dB
*
Sets the attenuation level of the sound output from the [
MASTER1
] and [
MASTER2
]
terminals.
Auto Standby
AUTOSTB
ON
*,
OFF
Turns the auto standby function on and off.
Mic Output To
Booth Monitor
MIC BTH
ON
*,
OFF
Sets whether or not to output the microphone’s audio signals from [
BOOTH
] terminals.
PC UTILITY
PC UTLY
ON
*,
OFF
Sets whether or not to launch the computer’s setting utility software automatically
when a USB cable is connected.
Factory Reset
INITIAL
YES
,
NO
*
Restores all the settings to their factory defaults.
1
Note that the output sound may be distorted even if the master level indicator does not light up to the very top.
