Pioneer DJM-850-K, Operating Instructions Manual

Page: 21 / 84

21
En
English
List of MIDI Messages
! “CC” is the abbreviation of “control change”. A control change is a type of MIDI signal used to transmit various types of control information, such as
timbre, volume, etc.
On this unit, values from 0 to 127 are output as CC mainly when controls and faders are operated. CC are also output when certain buttons are
operated.
! “Note” is a MIDI term used when pressing or releasing notes on a piano or other keyboard.
Category SW Name SW Type MIDI assignment Trigger/Toggle Transmitted data
CH1
TRIM Control CC 001 — 0-127
HI Control CC 002 — 0-127
MID Control CC 003 — 0-127
LOW
Control CC 004 — 0-127
BEAT Button CC 101 Trigger/Toggle OFF=0, ON=127
COLOR Control CC 005 — 0-127
CUE Button CC 070 Trigger/Toggle OFF=0, ON=127
Channel fader Control CC 017 — 0-127
CROSS FADER ASSIGN Switch CC 065 — 0, 64, 127
CH2
TRIM Control CC 006 — 0-127
HI Control CC 007 — 0-127
MID Control CC 008 — 0-127
LOW Control CC 009 — 0-127
BEAT Button CC 102 Trigger/Toggle OFF=0, ON=127
COLOR
Control CC 010 — 0-127
CUE Button CC 071 Trigger/Toggle OFF=0, ON=127
Channel fader Control CC 018 — 0-127
CROSS FADER ASSIGN Switch CC 066 — 0, 64, 127
CH3
TRIM
Control CC 012 — 0-127
HI Control CC 014 — 0-127
MID Control CC 015 — 0-127
LOW Control CC 021 — 0-127
BEAT Button CC 103 Trigger/Toggle OFF=0, ON=127
COLOR Control CC 022 — 0-127
CUE Button CC 072 Trigger/Toggle OFF=0, ON=127
Channel fader Control CC 019 — 0-127
CROSS FADER ASSIGN Switch CC 067 — 0, 64, 127
CH4
TRIM Control CC 080 — 0-127
HI Control CC 081 — 0-127
MID
Control CC 092 — 0-127
LOW Control CC 082 — 0-127
BEAT Button CC 104 Trigger/Toggle OFF=0, ON=127
COLOR Control CC 083 — 0-127
CUE Button CC 073 Trigger/Toggle OFF=0, ON=127
Channel fader Control CC 020 — 0-127
CROSS FADER ASSIGN Switch CC 068 — 0, 64, 127
Crossfader Crossfader Control CC 011 — 0-127
Fader curve
CH FADER ( ,
, )
Switch CC 094 — 0, 64, 127
CROSS FADER ( ,
, )
Switch CC 095 — 0, 64, 127
Master
MASTER LEVEL Control CC 024 — 0-127
BALANCE
Control CC 023 — 0-127
CUE Button CC 074 Trigger/Toggle OFF=0, ON=127
EQ CURVE ( ISOLATOR ,
EQ )
Switch CC 033 — 0, 127
BOOTH MONITOR BOOTH MONITOR Control CC 025 — 0-127
BEAT EFFECTS
c
Button CC 076 Trigger only OFF=0, ON=127
d
Button CC 077 Trigger only OFF=0, ON=127
AUTO/TAP Button CC 069 Trigger/Toggle OFF=0, ON=127
TAP Button CC 078 Trigger only OFF=0, ON=127
CUE Button CC 075 Trigger/Toggle OFF=0, ON=127