Pioneer DEH-S4050BT, Owner'S Manual

Page: 7 / 128

7
En
En
g
lis
h
1
Press SRC / OFF to select [RADIO].
2
Press BAND / to select the band from [FM1], [FM2], [FM3], [AM],
[SW1] or [SW2].
3
Press a number button ( 1 / to 6 / ).
NOTE
You can select a preset channel by pressing and turning the M.C. dial.
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to
[PCH] in the FUNCTION settings (page 18).
The six strongest stations are stored on the number buttons ( 1 / to 6 / ).
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press / to select a station.
Press and hold / then release to seek an available station.
Scanning stops when the unit receives a station. To cancel seek tuning,
press
/ .
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 18).
Radio
Receiving preset stations
Best stations memory (BSM)
To store stations manually
1
While receiving the station you want to store, press and hold one of the
number buttons (
1 / to 6 / ) until it stops flashing.
NOTE
You can select a preset channel by pressing and turning the M.C. dial. After selecting a
channel, press and hold the M.C. dial to store a station.
The unit searches for a station by PTY (program type) information.
1
Press and hold during FM reception.
2
Turn the M.C. dial to select a program type from [NEWS/INFO],
[POPULAR], [CLASSICS] or [OTHERS].
3
Press the M.C. dial.
The unit begins to search for a station. When it is found, its program service
name is displayed.
NOTES
• To cancel the search, press the M.C. dial.
• The program of some stations may differ from that indicated by the transmitted PTY.
• If no station is broadcasting the type of program you searched for, [NOT FOUND] is
displayed for about two seconds and then the tuner returns to the original station.
Disconnect headphones from the device before connecting it to the unit.
Using PTY functions
USB/iPhone/AUX
Playing back