Turning the clock display
on or off
You can turn the clock display on or off.
%
Press CLOCK to turn the clock display
on or off.
Each press of
CLOCK
turns the clock display
on or off.
#
The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Note
Even when the sources are off, the clock display
appears on the display. Pressing
CLOCK
turns
the clock display on or off.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owner
s man-
ual.
Selecting AUX as the source
%
Press SOURCE to select AUX as the
source.
Press
SOURCE
until
AUX
appears in the dis-
play.
#
If the auxiliary setting is not turned on,
AUX
cannot be selected. For more details, see
Switch-
ing the auxiliary setting
on the previous page.
Setting the AUX title
The title displayed for the
AUX
source can be
changed.
1 After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.
2 Press
a
or
b
to select a letter of the al-
phabet.
Each press of
a
will display a letter of the al-
phabet in
A B C ... X Y Z
, numbers and sym-
bols in
1 2 3 ... > [ ]
order. Each press of
b
will
display a letter in the reverse order, such as
Z
Y X ... C B A
order.
3 Press
d
to move the cursor to the next
character position.
When the letter you want is displayed, press
d
to move the cursor to the next position and
then select the next letter. Press
c
to move
backwards in the display.
4 Move the cursor to the last position by
pressing
d
after entering the title.
When you press
d
one more time, the entered
title is stored in memory.
5 Press BAND to return to the playback
display.
Other Functions
En
36
Section
10
