Pioneer DEH-MG2047, Service Manual

Page: 79 / 82

DEH-MG2047ZF/XU/UC
79
5 6 7 8
5 6
7
8
C
D
F
A
B
E
7.4 NOTES ON SERVICING
7.4.1 CLEANING
7.4.2 FACTORY SETTINGS
Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools:
Portions to be cleaned Cleaning tools
CD pickup lenses Cleaning liquid : GEM1004
Cleaning paper : GED-008
Portions to be cleaned Cleaning tools
Fans Cleaning paper : GED-008
Precautions when removing the radio unit
(to prevent damage during shipment)
•
Remove all discs loading in this product before disconnecting
the power supply connector (vehicle harness).
If discs have been
removed If discs cannot be
removed
•
Set this product to the
"Shipment mode" and then
disconnect the power supply
connector before shipping.
•
Disconnect the power supply
connector and ship the unit
with the discs loaded.
•
Setting the "Shipment mode"
From ACC ON and CD OFF state, press "1" button and "SCAN" button
at the same time for 1.5sec or more
•
Confirming "Shipment mode" setting
When Shipment mode setting is started, "SHIPMENT" on display
blinks and "SHIPMENT ON" for the completion of the setting.
-
When the Repair is Complete
When the Repair is Complete, make the CD mechanism ready for transportation.