DEH-80PRS/XNUC
21
5
6
7
8
5
6
7
8
C
D
F
A
B
E
5.2 ERROR CODE LIST
Error Code
The error status occurs when CD/USB/SD cannot operate, or stop during operation due to an error.
The reason for such error is displayed with a numeral.
This intends to reduce the number of nonsense calls from users and to assist in analysis/repair in services.
1. Basic display method
An error status (F0h) is entered in the Media status area of the source concerned, and the code in the minute/second area for notification.
E.g. For Read Error
Media status (disc) = 0xF0h
Minute (upper): FFh
Minute (lower): 07h
Second: 07h
-
As for VD ERROR, the error status shall be 0xFB.
-
Example of head unit display
The following occurs depending on the LCD display capability. The error No. comes in xx.
* For OEM, the error shall be displayed as per the specification of the OEM destination.
Display in 8 digits
Display in 6 digits
Display in 4 digits
ERROR-xx
ERR-xx
E-xx
2. List of error status codes
Code
Source Error status
Details and reasons
07h
CD
Read_Error
The CD mecha cannot read the Disc TOC
The TOC section of the PRD/Disc has been damaged
10h
CD
Carriage Home NG
The CRG of the CD mecha cannot move to the inner perimeter
The CRG of the CD mecha cannot move from the inner perimeter
=> Failure in the HOME SWITCH of the CD mecha. Failure in CRG movement.
Failure in communication between the microcomputer and servo LSI.
11h
CD
Focus_Error
(Focus Error in mechanism set up)
The CD mecha cannot take focus.
Dirt on the back of the disc and CD-RW. Significant vibration.
12h
CD
Spindle Rock,
ID/SubCode Read Error/RF AMP NG
No spindle lock occurs in the CD mecha.
No sub-code can be read.
No appropriate RF AMP gain is set up.
=> Failure in the spindle. Scratches or dirt on the disc. Significant vibration.
CD-R with no written content. Occasionally the back of the disc.
CD signal abnormality.
15h
CD
RF NG
Failed to read RF
-> CD-R with no written content.
CD-RW with no written content.
17h
CD
Setup NG
The AGC protection does not work. Easily become out of focus.
=> Scratches or dirt on the disc. Significant vibration. CD-RW
23h
CD
File Format NG
Written in the incompatible file format.
=> The CD-ROM recorded in a file format other than ISO 9660 Level 1
or 2 has been set (e.g.UDF).
USB
File Format NG
Written in the incompatible file format.
=> Recorded in a file format other than FAT 12/16/32
SD
File Format NG
Written in the incompatible file format.
=> Recorded in a file format other than FAT 12/16/32
30h
CD
Search Time Out
The CD mecha could not reach the target address
=> Failure in the CRG or tracking. Scratches on the disc
50h
CD
Loading_Ejecting_Mecha_Error
Disc LoadNG/EjectNG
Foreign object inserted in the mecha. Disc stuck.
16h
USB
Unsuccessful authentication of iPod
Unsuccessful authentication of iPod (this occurs only with iPod)
=> In case authentication is attempted again and an error is turned back
from the iPod or authentication IC during iPod authentication
18h
USB
Incompatible device
Incompatible device connection detected
=> In case something other than mass storage or iPod is connected
In case incompatible iPod is connected. Or in case the connected iPod
is compatible but has an incompatible firmware version.
SD
Incompatible device
Incompatible card connected detected (e.g. incompatible MMC) etc.
22h
CD
Not playable
No playable file
The CD-ROM set has no MP3, WMA, AAC or WAV file.
USB
Not playable
No playable file
The USB device set has no MP3, WMA, AAC or WAV file.
SD
Not playable
No playable file
The SD card set has not MP3, WMA, AAC or WAV file.
24h
CD
All DRM
All playable files in the disc are DRM.
USB
All DRM
All playable files in the device are DRM.
SD
All DRM
All playable files in the SD card are DRM.
19h
USB
Communication error
Cannot communicate with the device
=> In case the device failure or other reason prevents communication
SD
Communication error
Cannot communicate with the SD card
=> In case the SD card failure or other reason prevents communication