Pioneer DEH-6400BT, Operation Manual

Page: 18 / 36

Special device
(setting a special device)
Bluetooth devices that are difficult to establish a con-
nection with are called special devices. If your
Bluetooth device is listed as a special device, select
the appropriate one.
1
Press M.C. to display the setting mode.
!
If three devices are already paired, Device Full
is displayed and it is not possible to perform
this operation. In this case, delete a paired de-
vice first.
2
Turn M.C. to display a special device. Press to se-
lect.
3
Turn M.C. to display this unit
’
s device name,
Bluetooth device address and PIN code.
4
Use a device to connect to this unit.
!
To complete the connection, check the device
name (
Pioneer BT Unit ) and enter the PIN
code on your device.
!
PIN code is set to
0000
as the default. You
can change this code.
Auto connect (connecting to a Bluetooth device
automatically)
1
Press M.C. to turn automatic connection on or
off.
Visibility (setting the visibility of this unit)
To check the availability of this unit from other de-
vices, Bluetooth visibility of this unit can be turned
on.
1
Press M.C. to turn the visibility of this unit on or
off.
!
While setting Special device , Bluetooth visibi-
lity of this unit is turned on temporarily.
Pin code input (PIN code input)
To connect your device to this unit via Bluetooth wire-
less technology, you need to enter a PIN code on your
device to verify the connection. The default code is
0000 , but you can change it with this function.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select a number.
3
Press
M.C.
to move the cursor to the next posi-
tion.
4
After inputting PIN code, press and hold M.C.
!
After inputting, pressing M.C. returns you to
the PIN code input display, and you can
change the PIN code.
Device INFO
(Bluetooth device address display)
1
Press
M.C.
to display the setting mode.
2
Turn M.C. left to switch to the Bluetooth device
address.
Turning
M.C. right returns to the device name.
Bluetooth Audio
Important
!
Depending on the Bluetooth audio player con-
nected to this unit, the available operations
will be limited to the following two levels:
—
A2DP profile (Advanced Audio Distribution
Profile): You can only playback songs on
your audio player.
—
AVRCP profile (Audio/Video Remote Con-
trol Profile): You can perform playback,
pause playback, select songs, etc.
!
Since there are a number of Bluetooth audio
players available on the market, available op-
erations will vary extensively. When operating
your player with this unit, refer to the instruc-
tion manual that came with your Bluetooth
audio player as well as this manual.
!
Information related to a song (such as the
elapsed playing time, song title, song index,
etc.) cannot be displayed on this unit.
!
As the signal from your cellular phone may
cause noise, avoid using it when you are lis-
tening to songs on your Bluetooth audio
player.
!
When a call is in progress on the cellular
phone connected to this unit via Bluetooth
wireless technology, the sound of the
Bluetooth audio player connected to this unit
is muted.
!
When the Bluetooth audio player is in use,
you cannot connect to a Bluetooth telephone
automatically.
!
Playback continues even if you switch from
your Bluetooth audio player to another source
while listening to a song.
En
18
Section
02
Operating this unit