DEH-P4100SD/XS/EW5
32
1
2
3
4
1
2
3
4
C
D
F
A
B
E
6.2 CD TEST MODE
During pressing the "BAND" and "S.Rtrv" keys simultaneously, perform the reset-start, then turn ON
the CD to enter the CDS test mode.
How to issue the 1 - 6 keys in the slave test:
The specification of the model does not include the 1 - 6 keys issuance function for H/U and the remote control unit.
Therefore, in order to issue commands in a slave test, use the direct FUNCTION keys alternatively to enable the equal
key command sending function to the existing models.
Outline) Use the direct FUNCTION keys to display, select, or issue the KEY 1 - 6.
<Direct FUNCTION keys and corresponding functions>
*) For convenience, a name of each direct FUNCTION key is shown as "A", "B", and "C".
How to issue the 1 - 6 keys for the CDS source:
(The areas below are overwritten and displayed on character strings for the normal mode display.)
1
During the slave test mode, the key name "K1" is shown at the left by default.
In this condition, press the A key to toggle K1 - K6, and select a command to be sent to the slave.
SECOND
MINUTE
K
R
T
R
E
D
L
O
F
A key
2
During the K1 - K6 key names are displayed, press the B key and issue the selected command.
Send a key command selected
K 1 T by pressing the KEY 1.
B key
Press the C key to change display/non-display of key names.
When the non-display mode is selected for the K1 - K6 key names, "A key" and "B key" are invalid.
C key
*) Pressing the A key or B key does not work.
Normal mode
Issuing a key command
S.Rtrv/FUNC1
B
RDM/SHFL/FUNC2
Slave test mode
A
BAND + S.Rtrv
Switching a screen
Direct FUNCTION key
S.Rtrv
Key
RPT/LOCAL
RDM/SHFL
C
LOCAL/RPT/FUNC3
Issuing a key command
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
