2
Insert the supplied extraction keys into
both sides of the unit until they click into
place.
DIN Rear-mount
Installation using the screw
holes on the side of the unit
1
Remove the trim ring.
Extend top and bottom of the trim ring out-
wards to remove the trim ring. (When reattach-
ing the trim ring, point the side with a groove
downwards and attach it.)
!
It becomes easy to remove the trim ring if
the front panel is released.
Trim ring
2
Tighten two screws on each side.
Use either truss screws (5 mm × 8 mm) or
flush surface screws (5 mm × 9 mm), depend-
ing on the shape of screw holes in the bracket.
Screw
Dashboard
or Console
Factory radio
mounting bracket
Installation
En
29
Section
07
Installation
