The playback speed of audiobook can be changed.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select your favorite setting.
!
Faster
–
Playback faster than normal speed
!
Normal
–
Playback in normal speed
!
Slower
–
Playback slower than normal speed
3
Press
M.C.
to confirm the selection.
S.Rtrv
(sound retriever)
!
Refer to
Notes
!
Operation is complete even if the menu is can-
celled before being confirmed.
!
Switching the control mode to
iPod
pauses
song playback. Operate the iPod to resume
playback.
!
The following functions are still accessible
from the unit even if the control mode is set to
iPod
.
—
Volume
—
Fast forward/reverse
—
Track up/down
—
Pausing
—
Switching the text information
!
When the control mode is set to
iPod
, opera-
tions are limited as follows:
—
Only
CTRL
(control mode),
Pause
(pause)
and
S.Rtrv
(sound retriever) functions are
available.
—
Browse function cannot be operated from
this unit.
Audio Adjustments
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select AUDIO.
3
Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
FAD/BAL
(fader/balance adjustment)
1
Press
M.C.
to display the setting mode.
2
Press
M.C.
to cycle between fader and balance.
3
Turn
M.C.
to adjust the speaker balance.
Adjustment range (front/rear):
F-F15
to
F-R15
Adjustment range (left/right):
B-L15
to
B-R15
!
F-0
is the proper setting when only two speak-
ers are used.
!
Only for DEH-3200UB
.
When the rear output setting and preout set-
ting are
SUBW
, you cannot adjust front/rear
speaker balance.
Preset EQ
(equalizer recall)
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select an equalizer curve.
Powerful
—
Natural
—
Vocal
—
Custom1
—
Cus-
tom2
—
Flat
—
Super bass
!
When
Flat
is selected no adjustments are
made to the sound.
3
Press
M.C.
to confirm the selection.
Graphic EQ
(equalizer adjustment)
You can adjust the currently selected equalizer curve
setting as desired. Adjusted equalizer curve settings
are memorized in
Custom1
or
Custom2
.
!
A separate
Custom1
curve can be created for
each source. If you make adjustments when a
curve other than
Custom2
is selected, the equali-
zer curve settings will be memorized in
Custom1
.
!
A
Custom2
curve can be created common to all
sources. If you make adjustments when the
Cus-
tom2
curve is selected, the
Custom2
curve will
be updated.
1
Press
M.C.
to display the setting mode.
2
Press
M.C.
to cycle between equalizer band and
level.
3
Press
M.C.
to switch to equalizer band and then
turn
M.C.
to select.
100Hz
—
315Hz
—
1.25kHz
—
3.15kHz
—
8kHz
4
Press
M.C.
to switch to level and then turn
M.C.
to adjust.
Adjustment range:
+6
to
–
6
Loudness
(loudness)
Loudness compensates for deficiencies in the low-
and high-frequency ranges at low volume.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the desired setting.
OFF
(off)
—
Low
(low)
—
Mid
(mid)
—
High
(high)
3
Press
M.C.
to confirm the selection.
SW setting 1
(subwoofer on/off setting)
Operating this unit
En
14
Section
02
