Pioneer DEH-1450UB, Owner'S Manual

Page: 8 / 84

This setting allows you to switch your source to
USB automatically.
1
Press
M.C.
to turn the plug and play function
on or off.
ON
–
When USB storage device is connected,
depending on the type of device, the source is
automatically switched to
USB when you turn
on the engine. If you disconnect your USB stor-
age device, this unit
’
s source is turned off.
OFF
–
When USB storage device is connected,
the source is not switched to USB automati-
cally. Please change the source to USB man-
ually.
REAR-SP (rear output setting)
The rear speaker leads output can be used for full-
range speaker or subwoofer connection.
If you switch to
SW , you can connect a rear speak-
er lead directly to a subwoofer without using an
auxiliary amp.
Initially,
REAR-SP is set for rear full-range speaker
connection ( FUL ).
1
Press M.C. to select the desired setting.
FUL
—
SW
!
Even if you change this setting, there will
be no output if you select
OFF in SUB.W
(Refer to SUB.W (subwoofer on/off setting)
on the previous page).
!
If you change this setting, subwoofer out-
put in the audio menu will return to the fac-
tory settings.
PREOUT (preout setting)
The RCA outputs can be used for rear speaker or
subwoofer connection.
If you switch to
SW , you can connect a rear speak-
er lead directly to a subwoofer without using an
auxiliary amp.
Initially,
PREOUT is set for rear full-range speaker
connection ( SW ).
1
Press
M.C.
to select the desired setting.
SW
—
REA
!
Even if you change this setting, there will
be no output if you select
OFF in SUB.W
(Refer to SUB.W (subwoofer on/off setting)
on the previous page).
!
If you change this setting, subwoofer out-
put in the audio menu will return to the fac-
tory settings.
DEMO (demo display setting)
1
Press M.C. to turn the demo display on or off.
SCROLL (scroll mode setting)
When ever scroll is set to ON , recorded text infor-
mation scrolls continuously in the display. Set to
OFF if you prefer the information to scroll just
once.
1
Press
M.C.
to turn the ever scroll on or off.
Switching the dimmer setting
You can adjust the brightness of illumination.
%
Press and hold .
Using an AUX source
1 Insert the stereo mini plug into the AUX
input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to
AUX
(auxiliary input) on the previous page.
Turning the clock display on
or off
%
Press /DISP OFF to turn the clock dis-
play on or off.
#
The clock display disappears temporarily when
you perform other operations, but the clock display
appears again after 25 seconds.
Turning the display off or on
%
Press and hold /DISP OFF until the dis-
play turns off and on.
Operating this unit
8
Section
Operating this unit
En
02