Pioneer DEH-14 Page 52 Service Manual Download

Page: 52 / 56

DEH-1400,14

8. OPERATIONS AND SPECIFICATIONS

8.1 OPERATIONS

What’s what

VOLUME button
Press to increase or decrease the volume.

CD EJECT button
Press to eject a CD from your built-in CD player.

AUDIO button
Press to select various sound quality controls.

CLOCK button
Press to switch clock display on or off.

EQ button
Press to select various equalizer curves.

∞

buttons

Press to do manual seek tuning, fast forward, reverse
and track search controls. Also used for controlling
functions.

LOUDNESS button
Press to switch loudness function on or off.

SOURCE button
This unit is switched on by selecting a source. Press to
cycle through all of the available sources.

1–6 (PRESET TUNING) buttons
Press for preset tuning.

LOCAL/BSM button

BAND button
Press to select among three FM and one AM band and
cancel the control mode of functions.

DETACH button
Press to remove the front panel from the head unit.

Summary of Contents for DEH-14

























































Search results

Summary of Contents for DEH-14

Reviews:

Related manuals for DEH-14

Brands by name

Popular brands

Pioneer DEH-14, Service Manual

Search results

Summary of Contents for DEH-14

Reviews:

Related manuals for DEH-14

Brands by name

Popular brands