En
13
Basic
operation
2 Press the [PLAY/PAUSE
f
] button to play the
track.
3 Turn the [TRIM] knob.
Adjust the [
TRIM
] knob so that the [
CHANNEL LEVEL
] indicator’s orange
indicator lights at the peak level.
4 Move the channel fader to the maximum level.
5 Turn the [MASTER LEVEL] knob to adjust the audio
level of the speakers.
Adjust the audio level output from the [
MASTER
] output terminals to an
appropriate level.
!
To adjust the volume for speakers of PC/Mac, operate speakers of
PC/Mac instead of using the [
MASTER LEVEL
] knob.
!
If the sound is not output from the [
MASTER
] output terminals or
this unit is not recognized on your PC/Mac, access to the Pioneer DJ
support site, and then refer to [
FAQ
].
pioneerdj.com/support/
Monitoring the sound with
headphones
This section explains how to output sound from Deck 1 (left) as an
example.
1 Set the positions of the knobs as shown below.
Names of knobs, etc.
Position
HEADPHONES MIXING
knob
Center positon
HEADPHONES LEVEL
knob
Turned fully counterclockwise
2 Press the Headphone [CUE] button of the
channel 1.
3 Turn the [HEADPHONES LEVEL] knob.
Adjust the output level from the [
PHONES
] output terminal.
Closing the system
1 Close rekordbox.
2 Disconnect the USB cable from the PC/Mac.
