background image

ORDER NO.

PIONEER CORPORATION

   4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS SERVICE, INC.  P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC NV   Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  253 Alexandra Road, #04-01, Singapore 159936

   

   

   

   

   

PIONEER CORPORATION 2000

c

              Component                                                  Model                                 Service manual                  Remarks

STEREO CD TUNER

XC-F10

                                     RRV2319

STEREO POWER AMPLIFIER                                            M-F10

                                     RRV2321

SPEAKER SYSTEM

      S-F10-LRW                                     RRV2330

STEREO CASSETTE DECK

CT-F10

                                     RRV2308

   This manual.

Type

Model

Power Requirement

CT-F10

ZVYXJ

DC power supplied from other system component

CT-F10

RRV2308

1. SAFETY INFORMATION ...................................... 2

2. EXPLODED VIEWS AND PARTS LIST ................ 3

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .... 8

4. PCB CONNECTION DIAGRAM .......................... 14

5. PCB PARTS LIST ............................................... 18

6. ADJUSTMENT .................................................... 20

CONTENTS

7. GENERAL INFORMATION ................................ 25

    7.1  DIAGNOSIS ................................................. 25

      7.1.1  DISASSEMBLY ...................................... 25

      7.1.2  POWER ON SEQUENCE ...................... 26

    7.2  PARTS ......................................................... 27

      7.2.1  IC ............................................................ 27

8. PANEL FACILITIES AND SPECIFICATIONS .... 28

T–ZZR  JUNE 2000 Printed  in Japan

THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).

STEREO CASSETTE DECK

Remarks

÷

This products are component of systems. This product does not operate normally by
itself. Please connect it to the STEREO CD TUNER XC-F10 and the STEREO POWER
AMPLIFIER M-F10 for adjustment and operation inspection.

This product is a system(s) component.
Be sure to connect it to the prescribed system component(s), otherwise damage may
result.

Summary of Contents for CT-F10





























Reviews: