Pioneer CNSD-130FM, Upgrade Instructions

Page: 128 / 144

1 Display the
“
Audio Menu
”
screen.
=
For details, refer to Displaying the
“
Audio Menu
”
screen on page 126.
2 Turn MULTI-CONTROL to select
“
P.EQ Setting1
”
.
3 Press MULTI-CONTROL left or right to
select the equalizer band to adjust.
Each time MULTI-CONTROL is pressed left or
right, the equalization band is selected in the
following order:
Low
—
Mid
—
High
4 Press MULTI-CONTROL up or down to
adjust the level of the equalizer band.
Each time
MULTI-CONTROL
is pressed up or
down, the level of the equalization band in-
creases or decreases.
“
+6
”
to
“ –
6
”
is displayed
as the level is increased or decreased.
5 Turn MULTI-CONTROL to select
“
P.EQ Setting2
”
.
6 Press MULTI-CONTROL left or right to
select the desired frequency.
Press
MULTI-CONTROL
left or right until the
desired frequency appears in the display.
Low
: 40 Hz
—
80 Hz
—
100 Hz
—
160 Hz
Mid : 200 Hz
—
500 Hz
—
1 kHz
—
2 kHz
High : 3 kHz
—
8 kHz
—
10 kHz
—
12 kHz
7 Press MULTI-CONTROL up or down to
select the desired Q factor.
Press
MULTI-CONTROL
up or down until the
desired Q factor appears in the display.
2W
—
1W
—
1N
—
2N
8 Repeat above adjustments.
If necessary, you can adjust other equalization
bands successively.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Display the
“
Audio Menu
”
screen.
=
For details, refer to Displaying the
“
Audio Menu
”
screen on page 126.
2 Turn MULTI-CONTROL to select
“
Loud-
ness
”
.
3 Press the center of MULTI-CONTROL to
turn loudness on.
Loudness level (e.g.,
Mid
) appears in the dis-
play.
p
To turn loudness off, press
MULTI-CONTROL again.
4 Press MULTI-CONTROL left or right to
select a desired level.
Each time MULTI-CONTROL is pressed left or
right, level is selected in the following order:
Low
—
Mid
—
High
Using subwoofer output
The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.
1 Display the
“
Audio Menu
”
screen.
=
For details, refer to Displaying the
“
Audio Menu
”
screen on page 126.
2 Turn MULTI-CONTROL to select
“
Sub-
Woofer1
”
.
3 Press the center of MULTI-CONTROL to
turn subwoofer output on.
p
To turn subwoofer output off, press
MULTI-CONTROL again.
4 Press MULTI-CONTROL left or right to
set the phase of subwoofer output.
Each time MULTI-CONTROL is pressed left or
right, the phase of subwoofer output is se-
lected in the following order:
Reverse (Reverse phase)
—
Normal (Normal
phase)
5 Turn MULTI-CONTROL to select
“
Sub-
Woofer2
”
.
6 Press MULTI-CONTROL left or right to
select cut-off frequency.
Each time
MULTI-CONTROL
is pressed left or
right, frequencies are selected in the following
order:
50 Hz
—
63 Hz
—
80 Hz
—
100 Hz
—
125 Hz
En
128
Chapter
26
Customizing preferences