Installation manual CA-HM-UNI-EVO.005 | Version 1.0
EN - Installation Manual
Secure the assembly mount to thebrackets of your 2-DIN kit
using (4) Phillips screwsprovided. Route the RGB display cable
from the radio chassis, through the opening in
the assembly mount.
Secure the display brackets to the assembly mount using (4)
Allen head screws provided. Note: The brackets have a locking
pin on them which must face outwards.
Secure the radio chassis to the brackets
of your 2-DIN kit using (4) screws supplied
with the radio.
2
3
1
CA-HM-UNI-EVO.005
UNIVERSAL 2-DIN INSTALLATION KIT
a
b
c
d
f
g
e
a. Assembly
Mount
Kit components
Tools required (not included)
•
Phillips Screwdriver
•
4 mm Allen Head Screwdriver
•
Washer or Belt / Nut
Combination
Please note
For steps 2 and 6, reference to the installation manual provided with the radio for which hardware
to use. The display screen and radio chassis use two different types of screws.
b. Display
Housing
c. Display
Trim Ring
d. Display
Brackets
f. 4x #8 x 1/2”
Phillips Screws
e. 5° Angle
Display Brackets
g. 4x 4mm
Allen Head Screws
Optional extension cable CD-RGB150E available if required.
