Pioneer BDP-440, Operating Instructions Manual

Page: 48 / 136

07
48
En
 Changing the Parental Lock level for
viewing DVDs/BD-ROMs
Some DVD-Video discs containing scenes of violence, for
example, have Parental Lock levels (check the indications
on the disc’s jacket or elsewhere). To restrict viewing
these discs, set the player’s level to the level lower than
the discs.
1 Select and set Security

Parental Control

Next Screen.
Use

/

to select, then press ENTER .
2 Input the password.
Use the number buttons (0 to 9) to input the number, then
press
ENTER to set.
Use

/

to move the cursor.
3 Change the level.
Use

/

to change, then press ENTER to set.
Note
• The level can be set to
Off
or between
Level1
and
Level8 . When set to Off , viewing is not restricted.
 Changing the Country/Area code
1 Select and set Security

Country Code

Next
Screen.
Use

/

to select, then press ENTER .
2 Input the password.
Use the number buttons (0 to 9) to input the number, then
press
ENTER to set.
Use

/

to move the cursor.
3 Change the country/area code.
Use

/

to change, then press ENTER to set. Refer to
page 50.
Software updating
The player’s software can be updated using one of the
methods shown below.
• Connecting to the Internet.
• Using a disc.
• Using a USB memory device.
Product information on this player is provided on the
Pioneer website. Check the website shown on page 7 for
update and service information on your Blu-ray disc
player.
Caution
• Do not unplug the power cord or remove the USB
memory device/disc during software updating.
Otherwise, the updating will be aborted and
malfunction may occur with the player.
• There are two processes for software updating,
downloading and updating. Both processes may take
a certain period of time.
• Other operations are defeated during software
updating. Furthermore, updating process cannot be
canceled.
• When the front panel display is off, turn it on with FL
DIMMER . When updating the player’s software with
the front panel display off, do not unplug the power
cord until the unit turns off.
 Updating connecting to the Internet
Note
• Depending on the Internet connection conditions,
downloading may take a long time.
• Steps 1 to
5
are the operations performed by the user
(they are intended to download the software from the
Internet).
• Steps
6
to 8 are the operations performed
(automatically) by the player (they are intended to
update the software).
1 Connect to the Internet.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU .
3 Select and set Initial Setup.
Use

/

to select, then press ENTER .
4 Select and set Options

Update

Network

Start.
Use

/

to select, then press
ENTER
.
BDP-52FD_UCXCNSM_IBD_EN.book Page 48 Friday, September 30, 2011 9:59 AM