08
56
En
Others
The audio or video is
interrupted (distorted) when
using DRM, Wi-Fi Direct, or
Miracast.
Is there a microwave oven or
other device that generates
electromagnetic waves near
the unit?
Improve the wireless LAN environment by taking steps such as moving
the unit and mobile devices etc. closer together.
Are the mobile device and
unit far away from each other
or is there an object between
them?
• Use the unit in a place away from microwave ovens or others device
generating electromagnetic waves.
• Avoid using devices generating electromagnetic waves as much as
possible when using the unit with a wireless LAN.
When using wireless LAN, Wi-FI Direct or Miracast, depending on the
environment (radiowave interference) during sending/receiving of a
large volume of data such as HD quality image files and WAV 192 kHz/
24 bit high quality audio files, images and sound may be interrupted
during playback.
Problem
Check
Remedy
Power does not turn on.
Is the power cord properly
connected?
• Plug the power cord securely into the power outlet (page 19).
• Unplug the power cord, wait several seconds, then plug the power
cord back in.
The player’s power turns off
automatically.
Is
Auto Power Off
set to
10
min
/
20 min
/
30 min
?
If
Auto Power Off
is set to
10 min
/
20 min
/
30 min
, the player’s power
automatically turns off if no operation is performed for the set amount
of time (page 39).
The player’s power turns on
automatically.
Is
Control
set to
On
?
The player’s power may turn on together with the power of the TV
connected to the
HDMI OUT
terminal. If you do not want the player’s
power to turn on when the TV’s power is turned on, set
Control
to Off
(page 38).
This unit cannot be operated.
• Use within the specified usage temperature range (page 60).
• If the power cannot be turned off (to standby), reset the unit. Use a
thin rod to press the reset button on the main unit’s front panel. The
unit restarts and can now be operated.
The player cannot be
operated with the remote
control.
Are you operating the remote
control from a point too far
away from the player?
Operate from within 7 m of the remote control sensor.
Are the batteries dead?
Replace the batteries (page 5).
Unit heats up during use.
Depending on the usage environment, the temperature of the unit's
cabinet may increase somewhat during use, but this is not a
malfunction and there is no need to worry.
Input of the connected TV
and AV system switches
automatically.
Is
Control
set to
On
?
The input of the TV and AV system (AV receiver or amplifier, etc.)
connected to the
HDMI OUT
terminal may automatically switch to the
player when playback starts on the player or the menu screen (Home
Media Gallery, etc.) is displayed. If you do not want the inputs of the
connected TV and AV system (AV receiver or amplifier, etc.) to switch
automatically, set
Control
to Off (page 38).
Settings I have made have
been cleared.
• Have you disconnected the
power cord while the player’s
power was on?
• Has there been a power
failure?
Always press
STANDBY/ON
on the player’s front panel or
STANDBY/ON
on the remote control and check that
POWER OFF
has turned off from the player’s front panel display before
disconnecting the power cord. Be particularly careful when the power
cord is connected to the AC outlet on another device because the
player turns off in conjunction with the device.
Problem
Check
Remedy
BDP-170_72-BDP170-GBRB1_En.book 56 ページ ２０１４年３月２８日 金曜日 午前９時２６分
