Pioneer AVIC-X940BT, Operation Manual

Page: 234 / 240

Specifications
General
Rated power source ............... 14.4 V DC
(allowable voltage range:
10.8 V to 15.1 V DC)
Grounding system ................... Negative type
Maximum current consumption
........................................... 10.0 A
Dimensions (W × H × D):
AVIC-Z140BH
Chassis ..................... 178 mm × 100 mm ×
165 mm
(7 in. × 3-7/8 in. × 6-1/2 in.)
Nose ........................... 170 mm × 96 mm × 20 mm
(6-3/4 in. × 3-3/4 in. ×
3/4 in.)
AVIC-X940BT
Chassis ..................... 178 mm × 100 mm ×
165 mm
(7 in. × 3-7/8 in. × 6-1/2 in.)
Nose ........................... 170 mm × 96 mm × 12 mm
(6-3/4 in. × 3-3/4 in. ×
1/2 in.)
Weight:
AVIC-Z140BH ................... 2.14 kg (4.7 lbs)
AVIC-X940BT .................... 1.87 kg (4.1 lbs)
NAND flash memory ............. 4 GB
Navigation
GPS receiver:
System ................................ L1, C/Acode GPS
SPS (Standard Positioning
Service)
Reception system .......... 32-channel multi-channel
reception system
Reception frequency .... 1 575.42 MHz
Sensitivity ..........................
–
140 dBm (typ)
Position update frequency
........................................... Approx. once per second
GPS antenna:
Antenna ............................. Micro strip flat antenna/
right-handed helical polari-
zation
Antenna cable ................. 3.55 m (11 ft. 7 in.)
Dimensions (W × H × D)
........................................... 33 mm × 14.7 mm × 36 mm
(1-1/4 in. × 4/7 in. ×
1-3/8 in.)
Weight ................................ 73.7 g (0.211 lbs)
Display
Screen size/aspect ratio:
AVIC-Z140BH ................... 7 inch wide/16:9
AVIC-X940BT .................... 6.1 inch wide/16:9
Effective display area:
AVIC-Z140BH ................... 156.6 mm × 81.6 mm
AVIC-X940BT .................... 136.2 mm × 72 mm
Pixels
.............................................
384 000 (800 × 480)
Display method ........................ TFT Active matrix driving
Backlight ..................................... LED
Color system .............................. NTSC compatible
Tolerable temperature range:
Power on ............................ +14 °F to +140 °F
Power off ............................
–
4 °F to +176 °F
Angle adjustment
AVIC-Z140BH ................... 0° to 22°
AVIC-X940BT .................... 0°
Audio
Maximum power output ....... 50 W × 4
50 W × 2 ch/4
W
+ 70 W ×
1 ch/2
W
(for subwoofer)
Continuous power output ... 22 W × 4 (50 Hz to 15 kHz,
5 %THD, 4
W
LOAD, Both
Channels Driven)
Load impedance
......................
4
W
(4
W
to 8
W
[2
W
for 1 ch]
allowable)
Preout output level (max):
AVIC-Z140BH ................... 4.0 V
AVIC-X940BT .................... 2.2 V
Preout impedance:
AVIC-Z140BH ................... 100
W
AVIC-X940BT .................... 1 k
W
Equalizer (8-Band Graphic Equalizer):
Frequency .......................... 40 Hz/80 Hz/200 Hz/400 Hz/
1 kHz/2.5 kHz/8 kHz/10 kHz
Gain ...................................... ±12 dB
Loudness contour:
Low ....................................... +3.5 dB (100 Hz), +3 dB
(10 kHz)
Mid ....................................... +10 dB (100 Hz), +6.5 dB
(10 kHz)
High ..................................... +11 dB (100 Hz), +11 dB
(10 kHz)
(volume:
–
30 dB)
HPF:
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope ....................................
–
12 dB/oct
Subwoofer:
Frequency .......................... 50 Hz/63 Hz/80 Hz/100 Hz/
125 Hz
Slope ....................................
–
18 dB/oct
Gain ......................................
–
24/+6 dB
Phase .................................. Normal/Reverse
Bass boost:
Gain ...................................... 0 dB to +12 dB
En
234
Appendix
Appendix